Coalesse Bix Bridge Table Installation Instructions - Page 3

Browse online or download pdf Installation Instructions for Indoor Furnishing Coalesse Bix Bridge Table. Coalesse Bix Bridge Table 5 pages.

Print Page
Bridge Table - Rectangular Top:
1.
Assemble the metal frame as shown in Steps 1 & 2 using
1/4"-20 x 2.25" FH-PL-BO screws, (p/n 673085).
2.
Snap-on wire clips, (p/n 631069), are furnished for tops with
utility. Locate the wire clips at your discretion as shown in Steps 1 & 2.
3.
Temporarily remove the three JCB machine screws, (p/n 673058), on
the bottom of the seat. Align the metal frame to the bottom of the seat and
reinstall the machine screws. Repeat procedure to attach the other side of
the metal frame to another seat.
4.
Install double-sided tape to SA-BRKT00301 as shown, then align and attach
SA-BRKT00301 to the top using No. 8 x .75" PH-PL-BO wood screws,
(p/n 672024).
5.
Align and attach the top to the frame as shown using 1/4"-20 x .75"
machine screws, (p/n 673008).
6.
Remove backing from double-sided tape on SA-BRKT00301. Hang SA-DISP00301
onto SA-BRKT00301 tabs and press down to attach.
FRONT
Tape
SA-BRKT00301
Wood Screw
p/n 672024
SA-DISP00301
BACK
SIDE VIEW
Machine Screw
p/n 673008
4
5
Screw (1/4-20 x 2.25")
1
p/n 673085
BACK
SA-BRKT00301
Wood Screw
p/n 672024
FRONT
6
SA-DISP00301
TOP VIEW
Wire Clip
p/n 631069
3
Machine Screw
p/n 673058
B A C
K
F R O
N T
ASSEMBLED
939503317 Rev B
2
Page 3 of 5