Coast to Coast WF2AU1B Operation Manual - Page 3

Browse online or download pdf Operation Manual for Extender Coast to Coast WF2AU1B. Coast to Coast WF2AU1B 16 pages. Long-range, high-performance cellular wifi extender

Print Page

OPERATION (WiFi)

5) To connect to a WiFi network, select WiFi ONLY and then click on SCAN

FOR WiFi. See figure 3.This will bring up a list of all WiFi signals in

range (this could take a few minutes). The Winegard ConnecT 2.0 will

display available networks by signal strength. Select the desired network

and click CONTINUE. See figure 4.

6) Enter the network password, if prompted. Once the Winegard ConnecT

connects to the internet the INTERNET STATUS will show connected (this

could take as long as two minutes). You are now ready to use the WiFi.

INSTALLING THE SIM CARD FOR 4G USE

NOTE:

In order to update the ConnecT 2.0's firmware with the correct Carriers Network

Settings you will need an internet connection. Please make sure that you have a usable

WiFi connection.

The Winegard ConnecT 2.0 works with most Australian cellular providers.

Once you have selected the cellular provider of your choice, you will

need to insert an approved SIM card (Mini-SIM/Standard SIM – 25mm

x 15mm x 0.76mm). You will also need the correct APN (Access Point

Name) linked to the SIM card.

Once you have the SIM card from your cellular provider, you are ready to

install the SIM. In order to do this, follow these instructions:

1) Start with the ConnecT 2.0 powered off.

2) Remove the 2 Phillips head screws that attach to the SIM card cover

plate.

3) Remove the SIM card cover plate.

4) Take your newly acquired SIM card and insert it into the empty SIM

card holder, with the metal electronic chip facing downward. You should

hear a clicking sound once the card inserts into the correct position. DO

NOT force the SIM card in to the SIM holder. The card must be properly

positioned to function. If you do not hear a clicking sound, make sure that

the SIM card is inserted correctly. If it is inserted backwards it will not

insert completely and you will not hear a clicking sound.

5) Replace the SIM card cover plate and 2 screws.

SIM Card

Reset Button

LED

Figure 3

Figure 4

NOTE:

When using your own private data plan

some features will be unavailable, such as the

Data Plan page. For information about data usage,

contact your cellular provider.

NOTE:

After you have successfully swapped your

SIM card, you will need to update the software of the

ConnecT to recognize the SIM that is now installed.