Coastal WEATHERPAK MTR User Manual - Page 10

Browse online or download pdf User Manual for Weather Station Coastal WEATHERPAK MTR. Coastal WEATHERPAK MTR 20 pages.

Print Page

•

Screen 1: Pressure Temperature and Wind – Metric or English units.

•

Screen 2: Latitude and Longitude – Various decimal or Hs:Ms formats.

•

Screen 3: Forward All Weatherpak Data – If using ALOHA

custom applications only. Selecting "Yes" will prevent ALOHA

•

Screen 4: Calibrate Touch Screen – Calibrating re-aligns the touch screen. There is no need to calibrate the

display screen every time the system is used. If, over time, the screen becomes misaligned or the touch screen

buttons do not function properly, re-start the Receiver/Display box and follow the procedure presented on this

screen.

3-2

RECEIVER/DISPLAY FUNCTIONS AND OPERATION

The touch screen on the display provides access to multiple information screens which display the weather data

in a variety of ways. The screens include: the Active and Preview screens, a raw data screen, a columnar list

of all WEATHERPAK

each screen:

The Active screen is the most important and most frequently used information screen. It displays the data

•

received from the Active WEATHERPAK

selected to provide data to the plume model. Access to all other screens is initiated here.

•

The Weatherpaks Detected screen displays data from all WEATHERPAK

columnar fashion. If any of the remote systems are WEATHERPAK

distance) will also be displayed for those stations.

•

The Preview screen displays data from any one of the stations listed on the Weatherpaks Detected screen

and allows the operator to view the status of that system and change its Active or Default status, if desired.

Please Note: Reset the default upon receiving your new WEATHERPAK

organizations to purchase multiple WEATHERPAK

teams without taking into account the factory default setting. (See Section 3-3.4, "Changing or Setting the

Default WEATHERPAK

•

The Weatherpak Status screen displays the unique serial number of the WEATHERPAK

voltage, and the raw data line being transmitted by the selected system. The MTR Info screen (accessed by the

button at the bottom of the Weatherpak Status screen) lists the serial number of the Receiver/Display box, the

firmware version and the network ID.

•

The Graph Data screens display simple graphs of wind direction, wind speed, air temperature, barometric

pressure and relative humidity. The time line auto-scales to a maximum of three hours.

P/N: 0302-140-001 Rev. D

Figure 4 - Configuration Screen

s in the vicinity, and sensor data graphs. The following is a summary of the function of

. An Active WEATHERPAK

").

always, select "No". The "Yes" selection is for

or other plume models from working properly.

is defined as the weather station

's detected in the vicinity, in a

MTR's, the relative position (direction and

MTR. It is common practice for

weather stations and then distribute the systems to several

WEATHERPAK

User's Manual

, its tower battery

MTR