Aktacom ATE-1509 User Manual - Page 7

Browse online or download pdf User Manual for Multimeter Aktacom ATE-1509. Aktacom ATE-1509 15 pages. Datalogging lightmeter

Print Page

Remove the photo detector cap and face it light source

in a horizontal position.

Press

Enable the AUTO power off or Disable this function.

Read the illuminance nominal from the LCD display.

Over range: If the instrument only displays "OL", the

input signal is too strong, and a higher range should be

selected. The range will show on the down of the LCD,

LUX :400 -> 4K -> 40k -> 400k; FC: 40 -> 400-> 4k ->

40k.

Data-Hold mode: Press the hold key to select Data-Hold

mode. When HOLD mode is selected, the illuminance

meter stops all further measurements. Press the HOLD

key again to exit Data-Hold mode. Then it resumes

normal operation.

Peak-Hold

Pmax or Pmin recorder mode, and expose the photo

detector to light pulse measuring field. Press the PEAK

key again to exit PEAK recorder mode, then the meter

will resume normal operation.

Maximum and Minimum mode: Press MAX/MIN key to

choose the Maximum (MAX) reading, Minimum (MIN)

reading and current reading (MAX/MIN blink) recorder

the REC/SET key and RANGE/APO key,

mode: Press the PEAK key

to choose