AcraDyne AB-C18110 User Manual - Page 9
Browse online or download pdf User Manual for Battery Charger AcraDyne AB-C18110. AcraDyne AB-C18110 12 pages. Single charger for acradyne batteries ab-b1825li & ab-b1850li
Print Page3. Placement into service ____________________________
!
Only use the charger station in dry rooms.
All ventilation slits must be unobstructed. Place the device as
far away as possible from exposure to heat and solar energy,
as an ambient temperature of more than 95° F (35° C) can
lead to substantially longer charging times.
!
Prior to connecting the device, obsaerve specifications on the
type plate concerning line voltage, frequency, and current
consumption. Once the main power cable has been inserted
in the power socket, the charger station is operationally ready.
Nothing else needs to be switched on.
3.1. Operation
Green LED flashing
too hot or cold. Preferably charge the
battery at room temperature.
Red LED flashing
damaged. Remove the battery and
give it to the repair station or change
it. A battery may only be repaired by
professionals. Opening the casing could
result in an electrical shock.
Red LED
on (right LED): Battery is charging.
Green LED
on (right LED): Battery is fully
charged.
Red LED
on (left LED): Charger is connected to power.
Red
LED flashing (left LED): Charger is malfunctioning. Don´t charge
other batteries on this charger — they could be damaged or
defective after charging. Change the charger or have it repaired by
a professional. Opening the casing could result in an electrical shock.
CAUTION! When charging two batteries consecutively,
allow the charger to cool down between charges.
A fully charged battery may reside in the plugged charger
following full charge levels. If the battery is fully charged
on the charger, no charging current flows; the charging
process has stopped.
10000 SE Pine St.
(right LED): Battery is
(right LED): Battery is
Portland, Oregon 97216
www.aimco-global.com
!
CAUTION! Always
ensure correct
polarity +/-.
Phone: 1-800-852-1368
9