Acer AL1731 User Manual - Page 4

Browse online or download pdf User Manual for Monitor Acer AL1731. Acer AL1731 10 pages. Acer monitor user guide

Print Page

Setting Up the LCD Monitor

1.Make sure the AC power cord is connected to the LCD Monitor.

2.Turn on the LCD Monitor's power switch, located on the bezel of the monitor.

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS

provides four power saving modes through detecting a horizontal or vertical sync. signal.

When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will

light yellow.

A brief description and the location of all LCD Monitor function controls and indicators:

Stereo Speakers

Soft Power Switch

(DC Power-On Indicator)

Auto

Function Select and

Adjustment Control

Buttons

Figure 2-1

PC Audio Stereo output.

1. Press the soft power switch to switch the monitor ON/OFF.

2. LED lights Blue color --- Power is ON.

3. LED lights Yellow --- Monitor is in "Power Saving Mode".

4. LED is off --- Power is OFF.

1. Press the Auto Buttons Monitor will Auto-Adjusting.

2. Press the Auto Buttons over 2 second the Monitor Searching next

source.

1. Direct press either left or right control button can adjusting

speaker Volume control.

2. When press after Menu buttons then Press either left or right

control button for OSD first menu (left side) function selection.

3. When selection you want adjusting function then press Menu

buttons again for OSD second menu (right side) function

selection. You can Press the left button to decrease the OSD

setting and press the right button to increase the OSD setting.

1. Press the Menu will show OSD (On Screen Display) Function

Menus table.

2. When OSD (On Screen Display) Menus display press Menu

Buttons will enable selection function.