Canon 900D - i Color Inkjet Printer Printing Manual - Page 44
Browse online or download pdf Printing Manual for Printer Canon 900D - i Color Inkjet Printer. Canon 900D - i Color Inkjet Printer 48 pages. Bubble jet printer direct printing guide
Also for Canon 900D - i Color Inkjet Printer: Setup Instructions (2 pages), Printing Manual (4 pages), Printing Manual (50 pages), Quick Start Manual (29 pages), Printing Manual (30 pages)
Message
Unsupported device
connected.
Photo Paper Tray is
lowered.
Turn the dial to use the
sheet feeder.
Error code
Adjusting the Print Head Manually
If the automatic print head adjustment does not work or if you wish to adjust the print heads
manually, follow the procedure below.
(1) With the printer on, load two sheets of A4 plain paper in the printer.
(2) Press the Menu button.
(3) Use the
buttons to select Maintenance and then press the OK button.
(4) Use the
buttons to select Manual head align and then press the OK button.
If the Same Error Persists
If the same error persists after a countermeasure is taken according to the above error number, turn
off the printer, remove the power cord plug from the outlet, plug the power cord back in, and then
turn on the printer again.
Disconnect the camera connection cable, press the Resume button,
and then connect the cable once more.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
printer.
Connect only digital cameras or digital video camcorders that are
compatible with this printer.
When paper feeding is set to be done from the Photo Paper Tray,
paper cannot be fed from the Sheet Feeder.
Turn the knob on the Photo Paper Tray to change the way to feed
paper.
The size of paper loaded in the Photo Paper Tray may be different
from the paper size selected on your digital camera or the operation
panel of the printer.
When printing from the digital camera, change the paper size setting
of the digital camera to the size of paper loaded in the Photo Paper
Tray.
When using the digital camera that cannot select the paper size or
when printing from a memory card, change the setting on the
operation panel of the printer.
Turn off the printer, remove the power cord plug from the outlet, plug
the power cord back in, and then turn on the printer again.
If the same error persists, contact a Canon service representative.
(5) Use the
buttons to select Yes and then press the OK button.
(6) The message of "Did the pattern print properly?" is displayed on the
LCD.
Use the
buttons to select Yes and then press the OK button.
(7) Examine the printed pattern and enter the number of column "A" with
fewest white stripes using the
(8) Press the OK button.
(9) Use the
button and move the cursor to column "B".
(10)Repeat Steps (6) through (8) and enter the pattern numbers up to column
"G".
(11)After entering the pattern numbers up to column "G", press the OK
button.
Try This
buttons.
43