Acre Aperio AH40 Manual - Page 19

Browse online or download pdf Manual for Switch Acre Aperio AH40. Acre Aperio AH40 19 pages. Wireless hub

Print Page
Acre Aperio AH40 Manual
Aperio Integration
Technical Data
Physical Dimensions:
82 mm x 82 mm x 37 mm (H x W x T)
Power Supply:
8-24 VDC or Power over Ethernet (PoE)
Power Rating:
The power supply shall be able to deliver minimum, 1.2 W and be 3 A over current protected. Wire
requirements 16-22 AWG.
PoE IEEE 802.3.af compliant class 1 Powered device (PD)
Ethernet:
10BASE-T / 100BASE-TX Local Area Network
Radio Standard:
IEEE 802.15.4 (2400 – 2483,5 MHz), 16 channels (11-26), AES 128 bit encryption
Receiver Sensitivity:
-100 dBm
Wireless Transmit Power:
10 dBm/MHz. Peak value from average detector according to EN ETSI 300 328 Maximum spectral density.
Wireless Operating Range:
Indoors up to 25 m depending upon installed environment.

Internal Antenna:

Two port cross polarized patch antenna.
External Antenna:
One reverse polarity SMA external antenna connector. AH40 is certified to be used with ASSA ABLOY
external antenna AH ANTENNA 1. If other external antenna is used it must be of same type (dipole) and
not have larger antenna gain than 3.6 dBi.
Operating Temperature:
5 °C to 35 °C
Humidity:
< 95 % non-condensing
IP Classification:
IP20
Safety, Radio and EMC:
IEC 62368-1:2014, EN 62368-1:2014 + A11:2017
UL/CSA 62368-1:2014, EN 301 489-1 V2.1.1
EN 301 489-17 V3.2.0, EN 300 328 V2.2.2
EN 50130-4:2011 + A1:2014, EN 62311
FCC 47CFR Part 15 subpart B and subpart C, ISED RSS-247 and ICES-003
AS/NZS 4268
Integration Guide
Page 16