Acer AL1917Csd Manual - Page 6

Browse online or download pdf Manual for Monitor Acer AL1917Csd. Acer AL1917Csd 12 pages.

Print Page

(1)

Power Cord

Audio Cable

(2)

DVI C able

(3)

(option)

(4)

VGA C able

WARNING:

The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches

the shape of the socket it is inserted into, and tha t non e of the pins are bent or otherwise damaged.

Operating Your Monitor

First, switch th e power on to the monitor, then switch the power on to the computer. When you see the LED on

the power button go green, this indicates the computer is ready for use. Allow abo ut 10 seconds for the video

signal to appear. If you do not see the green light on the power button or a video signal, check the connections .

AUTO

Please refer to "External Controls " on Page 5. To adjust the OSD settings :

1. Press the MENU bu tton to open the OSD menu .

2. Use th e buttons marked < or >, to highlight a control, then press the MENU bu tton to en ter

3. Use th e buttons marked < or >, to adjust the control to the desired level.

4. When you have finished making all selections, press the MENU button to exit the O SD. (Or the adjustment

will auto-save a fter 20 seconds.)

Attach the monitor to the power cord which should then be

inserted into a properly grounded electric socket.

Connect the audio cable to the green audio jack on the back of monitor.

Connect the signal cable to the DVI output socket of the graphics card

on the computer. Then tighten the thumbscrews on the connector

Connect the signal cable to theVGA output socket of the graphics card

on the computer. Then tighten the thumbscrews on the connector

If OSD isactiv e, press to exit. If OSD is inactive, press and the

monitor will automatically optimize the display position, clock and

phase of your display.

If OSD is active, press to select or adjust OSD options.

Press to view OSD. Press AUTO to exit.

OSD Menu

Power on/off

Green: power on

Power

Orange: in sleep mode