aero-naut Foxx Manual - Page 7
Browse online or download pdf Manual for Toy aero-naut Foxx. aero-naut Foxx 20 pages. Pylon racer
Print Page
10
Sand front of fuselage flush with R 3 (A or B) and glue in place
R 11 A or R 11 B (1 mm birch ply), depending on type of motor.
Make sure to match motor mounting holes in R 11 with holes in
R 3!
Note: Depending on diameter of spinner and type of prop
i
adapter used it may be necessary to glue R 21 (A or B) to the
front of R 11 (A or B). Make sure openings for cooling air and
motor mounting screws match those of R 11.
R 21 A
R 20
R 21 B
R 20
R 11 A
9
Carefully sand top and bottom
contact surfaces of fuselage, then
sheet top and bottom of fuselage
with R 20 (3 mm balsa), grain
crosswise.
Attention:
Do not sheet contact
surface of tailplane!
R 11 B