Acer AM501 User Manual - Page 2

Browse online or download pdf User Manual for Monitor Acer AM501. Acer AM501 12 pages. 15″ crt

Print Page

IMPORTANT SAFETY INSTRUCTIONS

1.
Please read these instructions thoroughly.
2.
Please keep this guide for future use.
3.
Please disconnect the device from the main power supply before cleaning. Do not use any
liquids or aerosol sprays to clean this device. Use a clean dampened cloth in stead.
4.
To avoid damaging the device, only use factory-approved accessories.
5.
Protect the device against moisture.
6.
In order to set up the device, first place it on a stable surface. Tipping it over or dropping can
harm the monitor and cause injuries. Please follow the setup instructions of the manufacturer
while setting up your monitor.
7.
The ventilation openings are used for air circulation to protect the device against overheating.
8.
When connecting the device, obey the maximum connected load values of the main power
supply.
9.
The wall socket must be equipped with a non-fused grounded conductor contact for electrical
safety.
10.
The power cable must be laid in such a way nobody can trip over it. Please do not place any
objects on the cable.
11.
Follow all instructions and warning remarks that are printed on the device.
12.
If the device will not be used for a long period of time, please disconnect it from the main
power supply to avoid power surge damage such as lightning.
13.
Make sure no sharp objects or liquids enter the device via its air circulation openings. This
could result in a fire or an electric shock.
14.
Never open the device casing yourself, there are no user serviceable parts inside. Only
authorized technical service personnel should open the casing of this device.
15.
If any of the following conditions occur, the device must be disconnected from the main
supply, and be checked by a qualified service center:
Power cable or power plug are damaged;
Liquid has entered the device;
The device was exposed to moisture;
The device does not operate according to the user's guide, or you do not achieve any
improvement with the aid of this guide;
The device has been dropped and/or the casing is damaged;
The device shows obvious signs of a defect.
16.
Use only approved original spare parts, or parts in accordance with the original parts, for
repairs. The use of incorrect/unauthorized spare parts may cause further damage.
17.
Please contact your service center for any questions regarding service and repairs to
guarantee the device's performance and reliability.
18.
The power socket must be installed near the equipment to be easily accessible.
19.
The application of this monitor is restricted to special controlled luminous environments.
The screen surface trend to reflect annoying light of lamps and sunlight. To avoid these
reflections the monitor should not be positioned in front of a window or directed to
luminaries. The monitor is in compliance with Reflection Class III according to ISO 9241-7.
2