Acer CB342CUR User Manual - Page 27

Browse online or download pdf User Manual for Monitor Acer CB342CUR. Acer CB342CUR 32 pages. 34" lcd monitor
Also for Acer CB342CUR: Lifecycle Extension Manual (25 pages)

Print Page

1. Installation

Press the MENU key to open the OSD.

Toggle the joystick to the up or down to select Performance from the OSD.Then toggle

to the right to navigate to the element you wish to adjust and press the joystick to enter

it.

Toggle to the left or right to adjust the sliding scales.

OD: Select Off, Normal, or Extreme.

AMD FreeSync : To control support AMD FreeSync or not, default is On..

---------------------------------------------------------------------------------------------------------

Note: Only in the Support AMD FreeSync environment the control the AMD

FreeSync (On/Off) effect, such as in NVIDIA or Intel graphic card, Non-AMD

FreeSync Environment no effect.

VRB: To choose whether to support dynamic picture more clean control, default is Off.

---------------------------------------------------------------------------------------------------------

Note:

1. PIP/PBP mode is not support VRB.

2. HDR setting: "Auto" is not support VRB.

3. VRB set "On", when to turn on AMD FreeSync, will auto set VRB is "Off".

4. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto

set VRB is "Off".

5. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)

brightness.

6. VRB setting "On", when detection of Input Timing <75Hz, will auto off the

VRB and gray out to disable.

7. VRB = (Normal or Extreme), because the IC control dynamic picture is

cleaner, so the overall Brightness will be dark, "Extreme" will be darker than

"Normal".

Aim point: Show an Aim point on the screen for shooting games.

OSD

Mode - User

Picture

Language

Color

OSD Timeout

Audio

Transparency

Refresh rate num

Performance

OSD Lock

OSD

System

Save setting to...

Move

Enter

Press the MENU key to open the OSD.

Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the

right to navigate to the element you wish to adjust and press the joystick to enter it.

English

120

Oﬀ