AeroBed R111 Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Water Pump AeroBed R111. AeroBed R111 8 pages. Au / rdv pump

Print Page
Make sure product is completely dry and clean before deflating
and storing.
1.
To deflate your AeroBed
Valve (see figure A).
2.
For most compact storage, please close valve, press and
hold the DOWN arrow (Deflate) on the Control Wand until all
the air is expelled from the bed.
3.
Roll or fold the AC cord and wand cord and secure it. Fold the
sides of the bed into the center along its length. (see figure B)
Tightly roll and place the bed in the convenient carry bag for
easy transport and storage.
4.
Store your bed in a clean, dry place at room temperature
(above 50 °F/10 °C). Storing your bed under 50 °F (10 °C) and
over 100 °F (38 °C) may affect its performance and will not be
covered under warranty.
5.
If a mattress cover and/or valance is included with your bed,
it/they may be removed after deflation. Alternatively, you may
store your product with the mattress cover and /or valance on
the bed. Wrinkly may occur.
1.
Inspect your AeroBed
2.
Keep your AeroBed
repairable and will not be covered by your warranty.
3.
When not in use, store your AeroBed
extreme temperatures. Product must be at room temperature prior to inflating.
4.
Do not store your AeroBed
damage to your AeroBed
5.
In case of incidental damage to your bed, a repair kit has been included for some product
models. Please follow repair instructions carefully.
Bed
We recommend that you do not let the plush surface of your AeroBed
exposure to water or other liquids may cause damage to the plush surface that will not be covered
by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a
damp cloth to remove any stain. Let surface air dry completely.
You may clean the PVC on the sides and bottom of your AeroBed
detergent or household cleaner. Do not use strong chemicals or other compounds. Allow your bed to
air dry completely after cleaning and before storing.
Cover / Valance (if included)
Machine wash separately in warm using mild soap or detergent. Tumble dry on LOW HEAT. Remove
immediately after drying.
DEFLATION AND STORAGE
product, open the Quick Release
®

CARE AND MAINTENANCE

product prior to each use.
®
product away from any sharp objects. Large cuts or snags may not be
®
product in its duffle bag, in a clean, dry place out of
®
product folded inside sofa beds or roll-aways. This may cause
®
product that will not be covered under your warranty.
®
CLEANING
®
product with a mild dishwashing
®
5
A
B
product get wet. Repeated