AKUANA Opah DS User Manual - Page 5

Browse online or download pdf User Manual for Motorcycle Accessories AKUANA Opah DS. AKUANA Opah DS 10 pages. Heated vest

Print Page

OPERATION INSTRUCTIONS:

Turn on/o the heating function

• Once the battery is connected, the receiver will vibrate for

1 second. The LED indicator in the receiver will light up.

Please check table (1) for detailed information.

• Place the wrist band controller over the receiver as shwon

in drawing (3) for 1.5 seconds to turn on the heating funci-

ton. After turing the device on, the heating function will

automatically start with LOW heat function.

• To switch betwen LOW, MEDIUM, and HIGH heat

function. Simply place the wrist band controller over the

receiver for 0.3s. The vibration and LED indication will

response if the switching succeed. Please check table (1)

for detailed information.

• To turn o the device, place the wirst band controller over

the receiver for 1.5s. If the turn o action is complete, the

receiver will vibrate for 1.3 seconds, and the white LED

indicator will start to ash.

• The reciver has a touch-success respond. It is a very short

break. As long as you can feel the short vibration, it means

the wrist band controller and receiver are in sensible

range.

Low: 18W of heating power

Medium: 24W of heating power

High: 30W of heating power

The user can select each heating level according to the

surrouding environment and his/her own favor.