Air Fabric XL User Manual - Page 16

Browse online or download pdf User Manual for Synthesizer Air Fabric XL. Air Fabric XL 19 pages.

Print Page
Effects (continued)
Parameter
Compressor
Threshold
Ratio
Attack
Makeup
Delay
Time
L/R Ratio
Feedback
Reso LP Freq
Reso Bell Freq
Reso Bell Gain
Mix
Reverb
Pre-Delay
Time
Size
Shape
Damp
HPF Freq
Bright
Mix
Description
Use the button in the upper-left corner of this
section to enable or disable the compressor.
Signal level after which the compression will be
applied.
Amount of compression applied.
Length of time to apply the compression.
Amount of additional output gain for the
compressed signal.
Use the button in the upper-left corner of this
section to enable or disable delay.
Amount of time between the dry signal and the
delayed signal.
Reduces the delay Time in either the Left or
Right stereo field. This is useful for creating
offset, panned delays.
Amount of signal fed back into the delay line.
Low pass frequency for feedback resonance.
Center frequency for feedback resonance.
Amount of gain applied to the resonant
frequency.
Wet/dry amount of the delay effect.
Use the button in the upper-left corner of this
section to enable or disable reverb.
Length of time between dry signal and
reverberated signal.
Length of reverb tail.
Size of the reverberation environment.
Shape of the reverberation environment, which
will alter the density of reverb reflections.
At lower settings, the sound of individual
reflections is more present.
At higher settings, reflections are more uniform.
Amount of frequency dampening applied to the
reverberated signal.
Center frequency for reverb signal high-pass
filter.
Amount of high frequency decay.
Wet/dry amount of the reverb effect.
Value Range
-30.0 – 0.0 – +10.0 dB
1.0:1 – 20.0:1
0–100%
-20.0 – 0 – +20.0 dB
Off, On
1/16 – 16/4
50:100 – 100:100 – 100:50
0–100%
100 – 16000 Hz
100 – 16000 Hz
0–100%
0–100%
Off, On
0 – 250 ms
0.3 – 60.00 s
0–100%
0–100%
100–0%
0 – 2000 Hz
-100–0%
0–100%
16