American Range ARR-36IRWD Installation Manual - Page 7

Browse online or download pdf Installation Manual for Warming Drawer American Range ARR-36IRWD. American Range ARR-36IRWD 15 pages.

Print Page

Packing Materials

The packing materials that protect the appliance during shipping have been designed to be biodegradable and recyclable. Please be sure

that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.

Old Appliances

This appliance contains materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these

materials. Please be sure that the appliance presents no danger to children while being stored for disposal. Before discarding

an old appliance, unplug it from the outlet and cut off its power cord. Remove any drawers to prevent trapping hazards.

CAUTION

Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the

circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes

and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible.

IMPORTANT SAFETY INSTRUCTIONS

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the rating plate correspond with

the household electrical supply. Consult an electrician if in doubt. Only operate the Warming Drawer after it has been installed.

INSTALLER: Please leave these instructions with the consumer.

Electrical Connection

This appliance is equipped with a five-foot-long power cord with a three-prong grounding plug ready for connection

to a standard 120 VAC, 60 Hz, 15 AMP power source.

Installation Tips

» The warming drawer should be located in the cabinet at a convenient height for easy access.

» The drawer should be installed clear of drafts caused by open doors and windows.

» Proper clearance must be allowed for the warming drawer to open without interference.

» The warming drawer must be secured to cabinetry to prevent the drawer from tipping when loading or unloading.

» The warming drawer should be level to prevent the drawer sliding open or closed on its own. The drawer cannot be leveled after it has

been installed. If necessary install a shelf inside the cabinetry to support the drawer.

2 "

9 3/8"

4580 N. Walnut Rd., N. Las Vegas, NV 89081

INSTALLATION

Five foot cord and plug connects from lower right

rear side to 120 VAC service.

All installations must be performed in accordance

with local codes.

I N

" M

P T

2 4

D E

E N

O P

13592 Desmond St., Pacoima, CA 91331

WIDTH

DIMENSION

27" (686 mm)

25-5/8" (651 mm)

30" (762 mm)

28-5/8" (727 mm)

36" (914 mm)

34-5/8" (625 mm)

tel: 818.897.0808

888.753.9898

"X"