12-Voltair 12V6CF Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Air Compressor 12-Voltair 12V6CF. 12-Voltair 12V6CF 16 pages. 150 psi 6 cfm

Print Page

ASSEM BLY

Be sure to check over the 12-Voltair and inspect for any damages.

1. Side Latches

Use the provided 1/4" x 1" bolt, lock washer and nut to secure the anchor bracket to the

outside of the compressor. Once the anchor bracket has been secured use the 1/4" x

1 1/4" bolt and 1/4" lock nut to secure the rubber hold down in-between the ears of the

anchor bracket.

2. Quick Coupler

Install the threaded nipple and quick coupler into the right side of the compressor

through the two holes of the 12-Voltair cabinet.

3. Remove Service Panel- remove the 7 screws that hold the front service panel on the 12-Voltair. Once removed,

there is no need to reattach until your installation is complete.

4. Check Belt Tension- Although the 12-Voltair has been shipped with the proper amount of belt tension, please

check to make sure that it has not come loose during shipping.

5. Check Oil- The 12-Voltair is not shipped with any oil. It takes approximately 2 cups of oil to fill compressor to the

full level on the dipstick. Do not overfill. See specs below on what oil should be used.

-20F - 70F (-7C - 21C)

50F - 110F (10C - 73C)

-20F - 110F (-7C - 73C)

Voltair recommends the use of synthetic non detergent compressor oil for year around use.

Amsoil is just one manufacturer that can provide this oil (800) 96-69 - part #PCKQT

"A ir W here A nd Wh e n Yo u N e e d I t ! "

10W non detergent compressor oil

30W non detergent compressor oil

40W synthetic non detergent compressor oil

Rubber Hold Down

1/4" x 1 1/4" Bolt

1/4" Lock Nut

Anchor Bracket

1/4" x 1" Bolt

Cabinet side

1/4" Nut

Page 6