American Standard 3167.016 Specification Sheet
Browse online or download pdf Specification Sheet for Plumbing Product American Standard 3167.016. American Standard 3167.016 1 pages. American standard oakmont champion 4 round front toilet specification sheet
Print Page
OAKMONT CHAMPION
❑
2627.014
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion®4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
flush valve
• Round front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
❑
3167.016 Round Front Bowl
❑
4272.014 Tank
Nominal Dimensions:
721 x 492 x 844mm
(28-3/8" x 19-3/8" x 33-1/4")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures-
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability - July, 2003 revision
To Be Specified:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: (please specify color)
❏ Champion
Slow Close Round Front #5330.010
®
❏ Rise & Shine Round Front #5322.011
❏ Laurel Round Front #5308.014
❏ Supply with stop:
© 2008 AS America Inc.
4 ROUND FRONT TOILET
®
OAKMONT CHAMPION
ROUND FRONT TOILET
FINISHED WALL
721mm
(28-3/8)
19mm ± 6mm
(1 ± 1/4)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
273mm
381mm
(10-3/4)
(15)
C/L OF OUTLET
305mm
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K20
VITREOUS CHINA
492mm
(19-3/8)
356mm
(14)
SUPPLY
AS
REQ'D
387mm
(15-1/4)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
286mm
(11-1/4)
Revised 07/07
4
®
844mm
(33-1/4)