Bobrick B-38030 Instruction For Installation And Maintenance - Page 3

Browse online or download pdf Instruction For Installation And Maintenance for Dispenser Bobrick B-38030. Bobrick B-38030 6 pages.
Also for Bobrick B-38030: Instruction For Installation And Maintenance (9 pages)

Print Page
INSTALLATION OF CABINET:
B-380309 115V: 115V, 8.0 Amp, 920 Watts, 50/60 Hz, Single Phase, cUL Listed.
B-380309 230V: 208–240V, 3.6-4.4 Amp, 750-1050 Watts, 50/60 Hz, Single Phase, CE Marked, cUL Listed.
Mount unit on wall with six 4.2 x 32mm (#8 x 1-1/4") sheet-metal screws and washers (not furnished) at points indicated
by "S" in Figure 2. For plaster or dry wall construction, provide concealed backing to comply with local building codes,
then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with
sheet metal screws, or provide 3mm (1/8" ) toggle bolts or expansion bolts. If unit projects above wainscot, provide
aluminum channel or other filler to eliminate gap between skirt and finish face of wall. Provide electrical service from
nearest distribution panel to dryer mounting base in conformance with local electrical codes.
Figure 2
S
.88"
22mm
Diameter
Hole for
Between-Wall
Wiring
Dryer
Sensor
57-1/16"
1449mm
Dryer
Outlets
S
Lock
& Key
15"
381mm
Removable
Waste Bin
S
Form No. 38030-369 Issued 7/29/21
15-5/8"
396mm
11-13/16"
1-1/2"
300mm
S
S
38mm
S
11-1/2"
292mm
5-1/4"
133mm
Paper
Towel
Dispenser
S
28-9/16"
751mm
S
2"
11-3/16"
50mm
300mm
S
S
Finish Face of Floor
© 2021 by Bobrick Washroom Equipment, Inc.
Finish Face of Wall
4-11/16"
120mm
1/32"
1mm
1448mm
16"
406mm
57"
Printed in U.S.A.