Barksdale BFS-10-O Operating Instructions - Page 2

Browse online or download pdf Operating Instructions for Monitor Barksdale BFS-10-O. Barksdale BFS-10-O 4 pages. Flow monitor n/o-air

Print Page
1
Intended Applications
The flow monitor is designed exclusively for measuring and monitoring fluid media, e.g. in cooling
systems, measuring and test equipment and pumps. All non-standard applications should be
discussed with our engineers.
Read the operating instructions and the safety instructions carefully before using the flow monitor.
Nonobservance may cause injuries to health or material damage.
Barksdale GmbH cannot be held liable for any damage resulting from incorrect use.
DANGER
The flow monitor may only be used in the specified fields of application (see nameplate).
The temperatures must be within the specified ranges, the pressure values and the electrical rating
must not exceed the values specified.
Inside the device no explosive mixture (gas/air, dust/air or hybrids) may occur at any time. This is
to be guaranteed by the operator.
Observe also the applicable national safety instructions for assembly, commissioning and operation
of the flow monitor.
2
Safety Instructions
The safety instructions are intended to protect the user from dangerous situations and/or material
damage.
In the operating instructions the seriousness of the potential risk is designated by the following
signal words:
DANGER
Refers to imminent danger to men.
Nonobservance may result in fatal injuries.
WARNING
Refers to a recognizable danger.
Nonobservance may result in fatal injuries, and destroy the equipment or plant parts.
2
CAUTION
Refers to a danger.
Nonobservance may result in light injuries and material damage to the switch and/or to the plant.
IMPORTANT
Refers to important information essential to the user.
Disposal
The flow monitor must be disposed of correctly in accordance with the local regulations for
electric/electronic equipment.
The flow monitor must not be disposed of with the household garbage!
3
Standards
The standards applied during development, manufacture and configuration are listed in the
CE conformity and manufacturer's declaration.
4
Warranty/Guaranty
Warranty
Our scope of delivery and services is governed by the legal warranties and warranty periods.
Terms of guaranty
We guaranty for function and material of the flow monitor under normal operating and maintenance
conditions in accordance with the statutory provisions.
Loss of guaranty
The agreed guaranty period will expire in case of:
incorrect use
incorrect installation
incorrect handling or operation contrary to the provisions of these operating instructions
No liability is assumed for any damage resulting therefrom, or any consequential damage.
3