Euro Towers 3T Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Ladders Euro Towers 3T. Euro Towers 3T 3 pages.

Print Page

LADDER FRAME SCAFFOLD TOWER DOUBLE WIDTH KIT LIST

JUNE 19

AVAILABLE IN THREE LENGTHS: 2m, 2.5m or 3m

This range of Double Width Klik Towers gives an exceptional versatile system ideal for working in normal applications.

All frames can be used as uppers or lowers, simply place the platform on the third rung below the top of the tower

and the correct guardrail height is achieved.

The platform levels marked * indicate that these

platforms and handrails are repositioned.

PLEASE NOTE

If temporary platforms are used during assembly, reposition them during dismantling.

MOVING A TOWER Remove people and materials from the tower, and reduce the height of the

tower to 4.2m. Adjust and raise the stabilizers 25mm from the ground, ensure the couplers are tight,

and push from at or near the base by manual effort only, never use mechanical means. Recheck

level and reposition stabilizers before use.

MAXIMUM VERTICAL DISTANCE BETWEEN PLATFORMS MUST NOT EXCEED 4M