Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR Instruction Manual - Page 25
Browse online or download pdf Instruction Manual for Digital Camera Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR. Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR 41 pages. Canon eos 1d mark ii n: software guide
Also for Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR: Instruction Manual (28 pages), Software Manual (2 pages)
Print Page
Printing Images
Images can be automatically adjusted and printed within the print range.
Select an image and then select [File] menu
1
Select a printer to be used and then click the [Print] button.
2
Printing begins.
Selecting [File] menu
[Page setup] allows you to specify paper sizes.
You can set a printer profile to be used for printing. You can select a rendering intent
(matching method) when you have set the profile (p.1-21).
If you have set CMYK simulation profile (p.1-21), the image is printed in a tone
corresponding to the specified [CMYK simulation profile].
Printing with Easy-PhotoPrint
Easy-PhotoPrint is printing software dedicated for Canon BJ printers.
If Easy-PhotoPrint 2.1 or later has been installed in your computer, you can print images with
Easy-PhotoPrint.
Select an image and then select [File] menu
PhotoPrint].
Easy-PhotoPrint starts up.
Follow the instructions displayed on the Easy-PhotoPrint window to print images.
To print images with Easy-PhotoPrint, you need Easy-PhotoPrint 2.1 or later and a
Canon BJ printer that supports Easy-PhotoPrint 2.1 or later.
The specified output resolution (p.1-20) and trimming (p.1-10) are not supported.
The setting of CMYK simulation (p.1-21) is not supported.
You can set a rendering intent (matching method) when printing (p.1-21).
Displaying Images in EOS Capture
Digital Photo Professional version 2.0 is compatible with EOS Capture version 1.1 or later.
If you have EOS Capture version 1.1 or later installed on your computer, Digital Photo
Professional displays the images shot with EOS Capture.
[Print].
Connect the camera to your computer and set the camera's power
1
switch to <ON>.
When [CameraWindow] and other windows are displayed, close all the displayed
windows.
Select [Tools] menu
2
EOS Capture starts up.
Take a shot.
3
Click the [Shoot] button in EOS Capture or press the shutter button on the camera to
take a shot.
The shot image is displayed in the Digital Photo Professional main window.
When EOS Capture starts up, you can switch the Digital Photo Professional window
automatically from the main window to the edit image window (p.1-20).
[Print with Easy-
[Start EOS Capture].
Cover/Table of
Contents
Introduction
Displaying Thumbnail Images
1
and Performing Basic Edits
in the Main Window
2
Performing Detailed
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Displaying an
4
Image in the Quick
Check Window
5
Reference
Index
1-19