Euro-Pro TAPCLEAN HEPA EP035H3 Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Vacuum Cleaner Euro-Pro TAPCLEAN HEPA EP035H3. Euro-Pro TAPCLEAN HEPA EP035H3 6 pages. Turbo hand vac with tapclean hepa dust cup filter
Print PageGETTING TO KNOW YOUR HAND VACUUM
11
5
1. Dust Cup Release Button
2. On/Off Power Switch
3. Handle
TM
4. Intelli-Sense Filter Monitor
5. Dust Cup (Container)
6. Suction Hole
Technical Specifications
Voltage:
120V., 60Hz.
Power:
6.67 A., 800 Watts
12
Debris Screen
HEPA Filter
11
7.
Shoulder Strap
8.
Pet Hair Removal Attachment
9.
Cleaning Brush
10. Flexible Hose
11. Hepa Filter Assembly
12. Air Driven Turbo Brush
2
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Power cord not firmly plugged
HAND VACUUM
into outlet.
WILL NOT
2.
No power in wall outlet.
OPERATE
3.
Needs servicing.
4.
Thermostat has tripped.
HAND VACUUM
1.
Dust cup is full.
WILL NOT PICK-UP
2.
Unit clogged.
OR SUCTION
3.
HEPA Dust Cup Filter needs
POWER IS WEAK
cleaning or replacing.
TURBO BRUSH
1.
Rotating brush or elbow
DOES NOT
obstructed.
ROTATE OR
2.
Hose obstructed.
ROTATES
3.
HEPA dust cup filter clogged.
SLOWLY
1.
Dust cup is full.
2.
HEPA Dust Cup Filter is not
DUST ESCAPING
FROM HAND
installed correctly.
VACUUM
3.
There is a puncture/hole in
HEPA Dust Cup Filter.
HAND VACUUM
HOSE OR
1.
Hose clogged.
BRUSHES WILL
2.
Dust cup is full.
NOT PICK-UP
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS OR FOR TECHNICAL
SUPPORT
for Model EP035H3
Call: 1-800-798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note: After each Use - Always remove the Filter Debris Screen from the
HEPA Dust Cup Filter, then vigorously "TapClean" HEPA Filter until no more dust
can be removed. Filter should be rinsed and completely dried at least once a month
or when suction appears reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse
under a tap until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance. When finished, shake off excess water. Do NOT wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT
DRY IN DRYER.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2.
Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call 1-800-798-7398.
4.
Turn the unit off and unplug
from outlet. Allow to cool.
1.
Empty dust cup –
(see pages 5/6).
2.
Turn unit off and unplug
from wall outlet. Remove
HEPA Dust Cup Filter and
check for object(s) in air
duct and remove.
3.
Clean or replace HEPA
Dust Cup Filter.
(see pages 5/6)
1.
Clear obstructions. (see
page 5.)
2.
Clear obstruction.
3.
Clean HEPA dust cup filter.
(See pages 5/6.)
1.
Empty dust cup.
2.
Review HEPA Dust Cup
Filter instructions.
(see pages 5/6)
3.
Replace HEPA dust cup
filter. (see pages 5/6)
1.
Remove hose and/or
bushes. Remove obstruction
from hose.
2.
Empty and clean dust cup.
7