Boca Systems Lemur-C Cleaning Manual - Page 4

Browse online or download pdf Cleaning Manual for Printer Boca Systems Lemur-C. Boca Systems Lemur-C 5 pages. Routine cleaning procedures

Print Page

PLATEN CLEANING PROCEDURE

The Platen (rubber drive roller) should be cleaned once a year to prevent paper dust from building up on the

roller. (NOTE: The platen may require more frequent cleaning in dusty environments or when using inferior

ticket stock.)

1. With the print head still removed, clean the platen.

2. Apply a small amount of Isopropyl alcohol onto a paper towel to clean the rubber roller.

3. Clean only the part of the rubber roller where the media makes contact with.

4. Rotate the rubber roller clockwise a little and repeat step 4; continue in the same manner for one full

revolution of the rubber roller.

5. Move onto cleaning the sensor (optos) on the next page.

Above is a non-UPG path printer

Above is a UPG path printer

Platen