Euro-Pro EP91W Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Food Processor Euro-Pro EP91W. Euro-Pro EP91W 6 pages. Quad blade food processor 120v., 60hz., 800 watts
Also for Euro-Pro EP91W: Owner's Manual (6 pages)

Print Page

OPERATING INSTRUCTIONS

Whipping Attachment (Optional)

CAUTION: Make sure that the unit is

unplugged from the power source and

the speed control dial is in the "OFF"

position before inserting or removing

attachments.

1. Fit the processor bowl and spindle as

described previously on page 4.

2. Fit the whipping attachment over the

spindle and press firmly into place.

(Fig. 13)

3. Place the ingredients into the bowl.

4. Fit the lid and click into place as

described in the "Setting Up" section

(page 4).

5. Plug in the food processor.

6. Turn the food processor on selecting

high speed.

7. Recommended speed for whipping

is high.

8. Remove the whipping attachment from

the bowl before removing the whipped

ingredients.

FOR SAFETY, ALWAYS LEAVE THE

PUSHER IN PLACE WHILE OPERATING

THE PROCESSOR.

Fig. 13

Processing Examples

THIN SLICING

THICK SLICING

For thin slicing:

Recommended speed level is High

(Cucumbers, raw potatoes, lettuce, carrots)

For coarse slicing:

Recommended speed level is High

(Cabbage, carrots, onions)

For fine shredding:

Recommended speed level is High

(Carrots, cucumbers, cabbage)

For coarse shredding: -

Recommended speed level is High

(Lettuce, carrots, apples)

French Fry Blade Assembly

CAUTION: Make sure that the unit is

unplugged from the power source and

the speed control dial is in the "OFF"

position before inserting or removing

attachments.

Note: The French Fry Blade is already

assembled to the blade holder. Do not

try to remove it. (Fig. 14)

1. Fit the processor bowl and spindle

as detailed previously.

2. Using the finger holes in the french fry

blade holder, fit it over the spindle and

press firmly into place as indicated.

(Fig. 15)

WARNING: USE EXTREME

CAUTION WHEN HANDLING

BLADES. BLADES ARE SHARP.

4. Fit the lid and click into place as

indicated in Setting Up section

(page 4).

5. Plug in the processor.

6. WARNING: USE THE FOOD

PUSHER TO ADD FOOD INTO THE

PROCESSOR BOWL THROUGH

THE FEEDER TUBE.

Do not overload the bowl. In one

operation, you can process a

maximum 6 cups (1500 ml) of food.

Fig. 15

Fig. 14

FINE SHREDDING

COARSE SHREDDING

CLEANING & MAINTENANCE

CAUTION:

Make sure that the unit is unplugged from power source and speed

control dial is in the "OFF" position before inserting or removing any

attachments and before cleaning.

•

Never immerse the unit, cord or plug

in water or any other liquid.

•

Clean the main unit with a damp

cloth only.

•

Only the stainless steel blades can

be washed in the dishwasher.

•

All other parts can be cleaned in

warm sudsy water using regular

dishwashing liquid.

•

If food has spilled over on to the

main unit, use the pointy end of the

spatula to clean the cracks and

crevices of the base under the food

processor bowl. (Fig. 16)

Fig. 16

Hints & Tips:

•

The double chopping blade can be

used for chopping meat, fish,

vegetables, cheese, etc. setting

the speed to maximum.

•

For finer chopping, increase the

length of time you process.

•

For coarser chopping, use the pulse

button for a few seconds and monitor

food texture.

•

Pre-cut larger pieces to make them fit

into the feed tube. When chopping

hard foods (e.g. meat, cheese) cut

into 1 "/2.4 cm cubes.

•

For shredding, place food horizontally

into the feed tube, for slicing place the

food vertically.

Re-settable Thermal Safety

Device

Your Food Processor has been

designed with a unique safety system

which prevents damage to the unit's

motor and drive system, should you

inadvertently overload your appliance.

The safety system will automatically cut

the electric power to the appliance

when the device senses an overload or

excessive temperature in the motor or

drive system. Should this occur during

use and the appliance stops

functioning, follow the re-setting

procedure below:

Turn the "ON/OFF" speed control

to the "OFF" position

Unplug the unit from the wall

receptacle.

Remove and empty the processor

bowl. Ensure that no food is

jamming the cutting blades or

attachments.

Allow the appliance to cool down

for a minimum of 30 minutes.

Re-install the processor bowl and

re-plug appliance in the wall outlet.

Proceed to use the appliance as

before. Should the appliance still

fail to operate, turn the "ON/OFF"

speed control to the "OFF" position

and unplug from the wall outlet.

Allow the appliance to cool down

for an additional 1 to 2 hours. After

this time has passed, repeat the

restart procedure, steps 5 and 6

above.