Akura ADV148S Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for DVD Player Akura ADV148S. Akura ADV148S 20 pages. Dvd / mp3 / cd player

Print Page
Insert Batteries (Remote Control Unit)
You can control the player with the supplied remote
control unit. Insert two R6 (size AA) batteries by
matching the + and – markings inside the
compartment. When using the remote unit, point it
at the remote sensor on the player.
•
Do not leave the remote control unit in the
extremely hot or humid place.
•
Do not use a new battery with an old one.
•
Do not expose the remote sensor to direct light
from the sun or lighting apparatus. Doing so
may cause a malfunction in controlling the
player.
•
If you do not use the remote control unit for an
extended period of time, remove the batteries
to avoid possible damage from battery leakage
and corrosion.

CONNECTION TO A TV (FOR VIDEO)

METHOD 1 DVD Player + TV with Video input jack
METHOD 2 DVD Player + TV with Scart input jack (Audio & video)
Akura.p65
Range of Operation of the Remote Control
The remote control can be used up to approximately
5 meters in a straight line.
It can also be operated at a horizontal angle of up
to 30° from the remote sensor.
NOTE: Connect ONE of the above options ONLY,
to avoid picture interference.
1.
2.
3.
8
8
The player is equipped with composite A/V
outputs at the rear of the player. your TV will
require at least one set of A/V inputs. The patch
cord supplied with the player will connect your
player's A/V output to your TV's inputs.
Please remember to push the "Line" or "Input"
or "Video/TV" button on your TV remote to view
the DVD signal. Depending on your brand of
TV, this button will have a different name for
the same function, as per the examples
above.That function will allow the TV to be
switched from broadcast reception mode to one
of the A/V signals, your TV should have more
than one A/V Input.
The player is equipped for stereo playback. To
fully realize 2 channel sound, a Stereo TV or A/
V receiver is necessary. However, a Mono TV
may be used providing the TV one set of A/V
Inputs. The A/V inputs on a Mono TV will only
include one Audio Input for Mono sound. You
may connect either the Left or Right audio
channel from the DVD Composite audio out to
the mono TV audio input.
3/11/04, 12:45 PM