Barnes SGV5052L Installation Manuals - Page 7

Browse online or download pdf Installation Manuals for Water Pump Barnes SGV5052L. Barnes SGV5052L 18 pages. Submersible grinder pump 3, 5, 7.5hp, 3450rpm

Print Page

HOME

Manual Index

In the event of an overtemperature, the source of this

NOTES:

condition should be determined and rectiﬁ ed immediately.

Thermal protection shall not be used as a motor overload

device. A separate motor overload device must be provided

in accordance with NEC codes. DO NOT LET THE

PUMP CYCLE OR RUN IF AN OVERLOAD CONDITION

OCCURS !

Moisture Sensors: (Optional) - A normally open (N/O)

detector is installed in the pump seal chamber which will

detect any moisture present. It is recommended that this

detector be connected in series to an alarm device or the

motor starter coil to alert the operator that a moisture detect

has occurred. In the event of a moisture detect, check the

individual moisture sensor probe leads for continuity, (∞

resistance = no moisture ) and the junction box/control

box for moisture content. This situations may induce a

false signal in the moisture detecting circuit. If none of

the above tests prove conclusive, the pump(s) should be

pulled and the source of the failure identiﬁ ed and repaired.

IF A MOISTURE DETECT HAS OCCURRED SCHEDULE

MAINTENANCE AS SOON AS POSSIBLE.

Wire Size - If additional cord is required consult a qualiﬁ ed

electrician for proper wire size.