American Standard Tropic 7038.801 Installation Instructions Manual - Page 3
Browse online or download pdf Installation Instructions Manual for Plumbing Product American Standard Tropic 7038.801. American Standard Tropic 7038.801 6 pages. Spread lavatory faucet with speed connect drain
Also for American Standard Tropic 7038.801: Installation Instructions Manual (6 pages)
Print Page
7
ATTACH CABLE CONNECTOR
Thread CABLE CONNECTOR (1) clockwise
onto DRAIN BODY CONNECTION (2) and
hand tighten. Fig. A.
Your new POP-UP DRAIN installation is
now complete. Fig. B.
Note: Tailpeice on pop-up drain is 1-1/4" O.D.
Fig. B.
8
CHECK OPERATION OF POP-UP
Operate LIFT KNOB (1) to verify that STOPPER (2) opens and
closes.
Note: If STOPPER (2) does not open and close properly then
refer to the "troubleshooting section" of these instructions.
9
MAKE WATER SUPPLY AND WASTE CONNECTIONS
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS NOT INCLUDED
AND MUST BE PURCHASED SEPARATELY.
Thread TEE BODY (4) to SPOUT SHANK (5).
Thread HOSE CONNECTOR (6, 6A) to VALVE CONNECTIONS (7, 7A).
Connect water supply to VALVE BODIES (1,1A) with 1/2" IPS FLEXIBLE
SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3). Use
adjustable wrench to tighten connections. Do not over tighten.
Be careful not to kink copper supply when bending. Use tubing
cutter to cut to proper length.
Connect HOT water supply to inlet of left SHANK and COLD
water supply to right SHANK using sealant, appropriate
connectors, and COUPLING NUTS.
Connect 1-1/4" O.D. tailpiece on POP-UP DRAIN to
waste outlet.
Fig. A.
1
1/2" PIPE THREAD
2
HOT
3
Fig. B.
1
2
2
5
7
4
6
3/8 O.D.
BULL-NOSE
RISERS
FLEXIBLE
COLD
SUPPLIES
3/8 COMPRESSION
CONNECTION
1-1/4" O.D.
1
1A
7A
6A
COUPLING
NUT
3
COMPRESSION
NUT
FERRULE
M 9 6 8 4 7 9 R e v . 1 . 2