DOMPEL VEGAS POKER TROLLEY Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Indoor Furnishing DOMPEL VEGAS POKER TROLLEY. DOMPEL VEGAS POKER TROLLEY 6 pages.

Print Page
ENGLISH
LOCATION OF INSTALLATION
Install your Dompel product in a level place with no grooves or splices,
preventing rocking and vibration. The location must be airy and it must not
allow straight sunlight and it must be away from sources of heat (stoves,
ovens, etc.) and flammable products. Do not install your product outdoors.
CLEANING AND MAINTENANCE
Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone, kerosene, gasoline, bleach,
thinner, solvents, varsol, vinegar or other chemicals or abrasives such as sandpaper or steel brushes.
To easily clean it, use a solution of warm water with a neutral soap and then wipe dry carefully. If chemical products
reach the upholstery, clean as soon as possible, preventing the products from staining or drying the fabric. The
plastic parts can not be washed with boiling water. Chromed metal components can be cleaned with a soft, dry
flannel, and silicone-based automotive wax can be used to increase gloss and durability, in this case perform the
task following the wax manufacturer's instructions. Perform periodic cleaning, accumulated dust affects the beauty
of the product making it di翿 cult to clean the product.
IMPORTANT
Never drag the product, if necessary, ask other person's help to remove the product from the place. Do
not place containers with high temperature on your product, at the risk of damaging plastic parts or the
upholstery.
INSTALLATION AND ASSEMBLY
Remove all components from the carton. The casters are in a plastic bag inside the carton. The assembly of
this trolley is totally manual and requires no tools.
1
3
5
7
Assemble the 4 casters (B) at the bottom of the
base (A). Make sure they are well fitted and
aligned when resting on the floor.
Merely illustrative images.
Products may suffer changes in its components without prior warning. If any questions, contact Dompel.
Support the base
(A) on the floor or
on a table/stand
and fit the long
extenders (C).
Fit the short extenders
(F) on top of the drawer
module (D). Repeat this
process for the next 4
modules.
Fit the extenders (right and
left), support with the tube
(I) on one side of the last
drawer module (D) and on
the other side, fit the short
extenders (F).
SECURITY
2
4
6
8
Avoid accidents. After
unpacking the product, keep
all the pack material out of
children's reach.
Assemble the drawer
module (D) over the
long extenders (C).
The correct assembly
position of the drawer
module is with the
sides aligned with
the widest part of the
base.
Assemble the tube (J) on
the tube support extenders
(I) (right and left).
Assemble the top
(G) over the short
extenders (F, I)
of the last drawer
module (D). Make
sure the DOMPEL
label on the top is
aligned with the
front of the drawer
modules.
Fit the glass top (H)
on the top (G) and
assemble the drawers
(E) on the drawer
module rails (D). The
fitting, movement and
access of the drawers
will take place on both
sides of the trolley.