American Standard ELLISSE PETITE 0411.039 Specification Sheet
Browse online or download pdf Specification Sheet for Indoor Furnishing American Standard ELLISSE PETITE 0411.039. American Standard ELLISSE PETITE 0411.039 1 pages. American standard countertop sink specification sheet
Print Page
BARRIER FREE
ELLISSE PETITE™ COUNTERTOP SINK
• Petite stylish countertop sink made from
vitreous china
• Self-rimming with cutout template supplied
• Rear overflow
• Large deck area
Shown with 8871.802 Amarilis faucet with
Fabian handles (not included)
❏
0411.039 Faucet holes on 8" (203mm) centers
(illustrated)
❏
0410.021 Faucet holes on 4" (102mm) centers
❏
0411.047 Center hole only
Nominal Dimensions:
610 x 467mm
(24" x 18-3/8")
Bowl sizes:
457mm (18") wide
305mm (12") front to back
165mm (6-1/2") deep
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige
❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
© 2008 AS America Inc.
203mm
(8)
38mm
(1-1/2)
FINISHED
WALL
OR
SPLASH BACK
610mm
(24)
COUNTERTOP (BY OTHERS)
16mm
(5/8)
*
273mm
(10-3/4)
*
337mm
(13-1/2)
203mm
(8)
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J24
ELLISSE PETITE™
COUNTERTOP SINK
51mm
OPTIONAL
(2)
70mm
(2-3/4)
191mm
(7-1/2)
467mm
(18-3/8)
848mm
(33-3/8)
686mm
(27)
MIN.
29mm
(1-1/8)
200mm
(7-7/8)
178mm
(7)
SUPPLIES
AS REQ'D
787mm (31)
848mm (33-3/8)
FINISHED
FLOOR
VITREOUS CHINA
610mm
(24)
203mm
(8)
MIN.
152mm
(6)
MAX.
BARRIER FREE
CLEARANCE
229mm
(9)
MIN.
Revised 2/08
Revised