DOMUS LINE ATOM TW Installation Manual - Page 6

Browse online or download pdf Installation Manual for Light Fixture DOMUS LINE ATOM TW. DOMUS LINE ATOM TW 15 pages.

Print Page

INSTALLATION MANUAL

CONNECTING THE DEVICE TO THE POWER SUPPLY

- Connect ATOM TW power supply cable to one of the light

colour dynamic adjustment systems (for example MAGIC TUNE,

TOUCH TW, X-DRIVER TW etc., sold separately) (fig.7)

- For installation and operation of the light colour dynamic

adjustment system see the specific item's manual.

- Then connect the light colour dynamic adjustment system to a

safe power supply with 24Vdc stabilised voltage (sold separately)

- If more than one device must be connected to the power

supply ensure that the total sum of the power absorbed by the

devices (check the plate data shown on the product label) does

not exceed the maximum power permitted by the Converter.

- DOMUS Line guarantees the product only if powered with a

Converter supplied by us.

WARNING:

The Led MODULE, the power supply cable or any switch used,

are not replaceable, therefore in case of damage the device

must be entirely substituted.

WARRANTY

DOMUS Line guarantees the product only if powered with a

Converter supplied by us.

The warranty's general terms and conditions for this device are

available at www.domusline.com

CAUTION

ONLY SUITABLE FOR DRY LOCATION

CABINET USE ONLY

USE ONLY 12Vdc CLASS 2 POWER SUPPPLY

TYPE IC RECESSED – INHERENTLY PROTECTED

TO REDUCE THE RISK OF FIRE DO NOT INSTALL CLOSER THAN

10mm TO THE CABINET WALL OR IN A COMPARTMENT SMALLER

THAN 300mm BY 300mm