D2G gravitee GK-2009 Manual - Page 7
Browse online or download pdf Manual for Monitor D2G gravitee GK-2009. D2G gravitee GK-2009 9 pages. 10' x 20' display
Print Page
© 2023
Order #XXXXX
Item
Qty.
Description
1
1
38" GS210 Vertical Extrusion
2
1
38" S30 Vertical Extrusion
3
1
38" S30 Vertical Extrusion
4
2
18.8496" Z45 Curved Extrusion
5
1
21.7196" Z45 Curved Extrusion
6
2
18.8496" Z45 Curved Extrusion
7
1
21.7196" Z45 Curved Extrusion
8
1
36" S44 Vertical Extrusion
*
Counter Top Lock
1
2
Hole
Pin
Align hole with pin
Rotate pin. Spring
will push pin into hole.
1
2
4
4
5
MOD-1561 Monitor Stand Assembly
Steps:
1) Attach [4] and [5] between [1] [2] and [3].
2) Slide floor between [1] [2] and [3] to rest on [4] and [5].
3) Insert pins into [1] [2] and [3] where shown.
4) Slide shelf between [1] [2] and [3] to rest on pins.
5) Slide infill between [2] and [3].
6) Attach [6] and [7] between [1] [2] and [3] to secure infill.
7) Lock counter top to [6]. See
8) Attach [8] to counter top, using bolt.
9) Attach monitor mount to [8]. See
10) Attach monitor to mount then route monitor cord thru
conduit. See
Cord Management
Keep conduit attached to [8], when packing.
In fill
Shelf
Pin
Pin
3
Pin
Pin
Floor
*
Monitor
Mount
Counter Top Lock
detail.
Monitor Mount
detail.
Bolts
detail.
Slide connectors into groove
of extrusion. Tighten set screws
to secure connectors in place.
Attach monitor mount back
plate to extrusion, using bolts.
6
6
7
In fill
Monitor Mount
Monitor
Mount
*
V4 Connectors
8
Counter Top
Bolt
*
*
Completed Assembly
Cord Management
Cord
pinch
Route cord through conduit.
Attach conduit by pinching
the opening and inserting
into the groove of extrusion.
Step 3 of 5