American Standard Ellisse 2711.XXXW Series Installation Instructions

Browse online or download pdf Installation Instructions for Bathtubs American Standard Ellisse 2711.XXXW Series. American Standard Ellisse 2711.XXXW Series 4 pages. 6' x 48" whirlpool, high gloss acrylic shown less all fittings

Print Page
ELLISSE™
6' X 48"
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
927mm
(36-1/2)
305mm
(12)
1219mm
(48)
GRAB BAR
RECOMMENDED
FITTING AREA
FITTING
LOCATION
64X279mm
2-1/2 X 11)
51mm
(2)
INTEGRAL
FEET
SUPPORT
1-1/2 N.P.T.M. THREADS
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2711 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
SYSTEM II PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752296-100 REV. H
2711.XXXW
SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

1829mm
(72)
ON/OFF SWITCH
OUTLINE OF CUTOUT
1791 X 1181
(70-1/2 X 46-1/2)
229mm x 356mm
(9 x 14) FLOOR
CUTOUT
PROVIDE ACCESS
OPTIONAL
TO PUMP FOR SERVICE
DECK FITTING
ON ALL INSTALLATIONS
AREA
LEVELING STRINGER
SAFE-T-
(NOT FOR SUPPORT)
HEATER
REMOVABLE
C/L OF
BLANK
OVERFLOW
546mm
105mm
(21-1/2)
(4-1/8)
495mm
ROUGH
(19-1/2)
FLOOR
121mm
64mm
(4-3/4)
(2-1/2)
72 x 48 x 21-1/2 In. (1829 x 1219 x 546mm)
148 Lbs. (67 Kg.)
965 Lbs. (434 Kg.)
95 Gal. (360 L)
74 Gal. (280 L)
43 x 28 In. (1092 x 711mm)
68 x 38 In. (1727 x 965mm)
14-5/8 In. (371mm)
40 Lbs./Sq.Ft. (195 Kgs./Sq.m)
30.3
60.8
2.1 HP, 14.4 AMPS ,120V.
2.1 HP, 15.6 AMPS ,120V.

THANK YOU...

102mm
for selecting an American Standard bath. Your new
(4)
bath is shipped to you after careful inspection. The
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
installation are your selected fittings and electrical
C/L OF
DRAIN
connections for a whirlpool.
PUMP
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Safe-T-Heater 9075.120*
• Tile Bead Kit 751755-100*
List of Required Components (not included):
• Drain 1583.470*
* see your American Standard Distributor
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 20 amp
• Cement, Plaster,
© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Stringers
GFI Outlet
Grout