D3 EZ-Bell V1 User Manual - Page 3
Browse online or download pdf User Manual for Accessories D3 EZ-Bell V1. D3 EZ-Bell V1 7 pages. Doorbell camera
Print Page
6. Requirement
Power
10-30VAC,
10VA or 12VDC, 0.5 to 1.0A wired to an in home mechanical or digital doorbell
chime. Note: A Digital Doorbell Adapter must be installed if a digital doorbell chime is present.
WARNING: An in-line resistor (10 Ohm, 10 Watt) is required when installing the doorbell camera
without a wired, in-home doorbell chime. This is typically done when testing the doorbell or
performing a demonstration. Failure to install a resistor when a chime is not present may result
in damage to the doorbell camera.
Chime
Security Panel (XP02) as Chime - XP02 Panel can be a chime of the EZ-Bell doorbell.
Mechanical Chime - If the chime has metal bars and a striker pin, it is mechanical and
will work without additional hardware.
Digital Chime - If the chime has a speaker that plays a tone when pressed, it is digital
and will require the installation of the Digital Doorbell Adapter and the enabling of the
digital doorbell setting in the app to function properly.
Tube Chime - If the chime has a series of tubular bells, it is a tube chime and is
incompatible with the doorbell camera.
Intercom System - If the doorbell button fixture includes a speaker, it is an intercom
system and is incompatible with the doorbell camera.
No Chime - If there is no chime in the system, the customer will only receive alerts on
their phone and a resistor (10 Ohm 10 Watt) must be used in-line with the doorbell
camera.
WiFi
A Wi-Fi Internet upload speed of at least 1.5 Mbps is required at the location where the doorbell
camera is installed.
Note: In Canada when using 5 GHz on band 1, the device is intended for indoor use only.
Confidential for D3 Internal Use Only
3