Da-Lite 29534 Instruction Book - Page 7

Browse online or download pdf Instruction Book for Projection Screen Da-Lite 29534. Da-Lite 29534 14 pages.

Print Page

Installation (continued)

5. Using the other 4" piece of trim (C) as a guide, secure the

opposite end of the T-track (B) section on the end hole with a

#10 screw. Once both ends are attached, slide the 4" trim (C)

pieces along the track to align the other positions and attach

a #10 screw into the hole openings until completed (See

Figure 2).

NOTE: Sliding the trim along the T-track (B) will maintain the

proper alignment when attaching the T-track (B) to the wall.

This alignment is necessary to allow the trim to snap on

easily at the end of the screen installation. Ensure the

opening is level on all four sides. If the opening is not level,

the T-track (B) will need to be shimmed in order to ensure the

screen trim is level once attached to the T-track (B).

#10 Screw

4" Trim

Piece

T-track

Step 4

Step 5

Figure 2

6. Repeat Steps 4 and 5 until all T-track (B) sections have been

secured to the wall opening (See Figure 3). For top and

bottom sections, use 4" piece of trim (C) to overlap at the

seams as a guide to ensure that both T-track (B) pieces are

flush with each other in the wall opening.

Figure 3