Da-Lite IDEA 22516 Installation Instructions Manual - Page 9
Browse online or download pdf Installation Instructions Manual for Projector Accessories Da-Lite IDEA 22516. Da-Lite IDEA 22516 12 pages. Idea interactive rear projector cart
Print PageInstallation Instructions
Cable Management
On Side Columns (Monitor Arm Accessory)
1.
Slide two #10-24 square nuts (V) into side columns (H) prior
to attaching column extenders (J and K).
2.
Install two #10-24 x 3/8" Phillips pan machine screws (BB)
through two cable clips (P) and into #10-24 square nuts (V).
(See Figure 11)
1
(V) x 2
Figure 11
3.
Route cables through cable clips and use cable ties (CC) to
secure cables along side column. (See Figure 12)
cable (example)
Figure 12
(P) x 2
(BB) x 2
2
(CC) x 2
From Projector
4.
Use two 1/4-20 x 3/8" Phillips pan machine screws (AA) to
secure two cable clips (P) along base of cross bar
assembly. (See Figure 13)
4
Figure 13
5.
(Optional) Route cables from projector through boom arm
channel down to cross bar assembly base. (See Figure 14)
6.
Route cables through cable clips and use cable ties (Q) to
secure cables along cross bar assembly base.
Figure 14)
cable (example)
(CC) x 2
6
Figure 14
22516/22951
(P) x 2
(AA) x 2
(See
5
6
9