Da-Lite Tensioned Advantage Deluxe Electrol Specification
Browse online or download pdf Specification for Projector Accessories Da-Lite Tensioned Advantage Deluxe Electrol. Da-Lite Tensioned Advantage Deluxe Electrol 2 pages. Automatic electric projection screen
Also for Da-Lite Tensioned Advantage Deluxe Electrol: Specification (2 pages), Instruction Book (12 pages), Instruction Book (12 pages)
Print Page
Tensioned Advantage
Automatic Electric projection Screen Model
SUGGESTED SPECIFICATIONS:
(H) x
(W).
have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) not more than 1.2 amp. Shall have motor mounted inside the
roller, to be three wire with ground, quick reversal type, oiled for life, with automatic
thermal overload cutout, integral gears, capacitor and an electric brake to prevent
coasting. To have pre-set but adjustable limit switches to automatically stop fabric door in
the "down" position. The door will lift to the closed position where a micro switch shall cut
off the electrical current to the door motor. The roller to be of rigid aluminum. Screen
motor is electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have motor
mounted inside the roller, to be three wire with ground quick reversal type, oiled for life,
with automatic thermal overload cutout, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically stop
picture surface in the "up" and "down" positions. The roller to be of rigid metal. Screen
fabric to be seamless, flame retardant and mildew resistant vinyl, with black masking
borders standard. Each side of the fabric to have tab guide cable system to maintain even
lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical
Viewing Area (H x W)
In.
Cm
43" x 57"
109 x 145
50" x 67"
127 x 170
60" x 80"
152 x 203
69" x 92"
175 x 234
87" x 116"
221 x 295
108" x 144"
274 x 366
120" x 160"
305 x 406
Viewing Area (H x W)
In.
Cm
45" x 80"
114 x 203
52" x 92"
132 x 234
54" x 96"
137 x 244
58" x 104"
147 x 264
65" x 116"
165 x 295
78" x 139"
198 x 353
90" x 160"
229 x 406
Viewing Area (H x W)
In.
Cm
50" x 80"
127 x 203
57½" x 92"
146 x 234
60" x 96"
152 x 244
65" x 104"
165 x 264
69" x 110"
175 x 279
72½" x 116"
184 x 295
87" x 139"
221 x 353
100" x 160"
254 x 406
Viewing Area (H x W)
In.
50" x 50"
60" x 60"
70" x 70"
84" x 84"
6' x 8'
8' x 8'
7' x 9'
9' x 9'
8' x 10'
10' x 10'
9' x 12'
12' x 12'
Deluxe Electrol
®
projection screen(s),
The Tensioned Advantage® Deluxe screen shall
Video (NTSC 4:3) format Dimensions
Nominal Diagonal
In.
72"
84"
100"
120"
150"
180"
200"
HDTV (16:9) format Dimensions
Nominal Diagonal
In.
92"
106"
110"
119"
133"
159"
184"
Wide (16:10) format Dimensions
Nominal Diagonal
In.
94"
109"
113"
123"
130"
137"
164"
189"
Square format Dimensions
Cm
127 x 127
73¼"
152 x 152
84¼"
178 x 178
95¾"
213 x 213
112¼"
183 x 244
122¼"
244 x 244
125¾"
213 x 274
136¼"
274 x 274
134¾"
244 x 305
149¾"
305 x 305
146¾"
274 x 366
170¼"
366 x 366
175¼"
tension on the screen surface. The ends of the slat to be protected by heavy duty plastic
caps enclosing a preset adjustable mechanism for screen tensioning. Case shall be a
white powder coated extruded aluminum. Bottom of case to be self-trimming with a built-
in flange around the bottom of the case. A section of the bottom of the case shall be an
aluminum door equipped with hinges so that it opens and closes automatically with the
lowering and raising of the picture surface. The balance of the bottom of the case shall be
a second hinged aluminum door with manual opening to provide access. Hinges shall be
mounted in a concealed way. Junction box shall be internally integrated into the housing
making it possible to install the housing and wire to the building's electrical system during
construction. The junction box shall contain a quick connect connector that is mounted
in the housing for easy plug-in connection to the motorized fabric and roller assembly.
The motorized fabric and roller assembly to be installed in the case at the factory or at a
later time at the job site. To be complete with integrated low voltage control unit and three
position control switch and cover plate. Suitable for use in environmental air space in
accordance with section 300-22 (c) of the National Electric Code, and sections 2-128,
12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be listed
by Underwriters' Laboratories.
Overall Length of Case*
Cm
In.
183
79¼"
213
90¼"
254
104¼"
305
118¼"
381
145¼"
457
170¼"
508
187¼"
Overall Length of Case*
Cm
In.
234
102¾"
269
115¼"
279
119¾"
302
128¼"
338
141¼"
404
166¼"
467
184¼"
Overall Length of Case*
Cm
In.
239
103¼"
277
116¼"
287
120¾"
312
129¼"
330
134¾"
348
142¼"
417
163¼"
480
185¼"
Overall Length of Case*
In.
Cm
186
214
243
288
311
319
346
342
380
373
434
445
®
SpECifiCATioN DATA
Approx. Ship. Wt.
Cm
Lbs.
201
102
229
114
265
125
300
148
369
170
432
189
476
203
Approx. Ship. Wt.
Cm
Lbs.
261
125
293
140
304
145
326
150
359
163
422
188
405
203
Approx. Ship. Wt.
Cm
Lbs.
262
125
295
148
307
145
328
150
342
157
361
170
415
188
471
203
Approx. Ship. Wt.
Lbs.
93
104
116
125
140
148
155
159
165
168
189
194
*Case length does not include flange
Kg
46.3
51.7
56.7
67.1
77.1
85.7
92.1
Kg
56.7
63.5
65.8
68
73.9
85.3
92.3
Kg
56.7
67.1
65.8
68
71.2
77.1
85.3
92.1
Kg
42.2
47.2
52.6
56.7
63.5
67.1
70.3
72.1
74.8
76.2
85.7
88