Canon Color imageCLASS MF8170c Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for All in One Printer Canon Color imageCLASS MF8170c. Canon Color imageCLASS MF8170c 8 pages. Color laser copier printer scanner fax with network
Also for Canon Color imageCLASS MF8170c: Installation Instructions (1 pages), Additional Instructions (2 pages), Network Manual (48 pages), Instructions Manual (8 pages), Remote Ui Manual (40 pages), Specification (2 pages)

Canon Color imageCLASS MF8170c Instructions Manual

To Use the Machine as a Network Printer (Network Connection)

IMPORTANT
• The machine needs to be restarted for the specified settings to become effective. To restart the machine,
disconnect the power cord, wait for at least 10 seconds, and connect the power cord again.
NOTE
• For details on specifying network settings, see Chapter 2,"Specifying the Network Settings," in the Network Guide.
• For additional network protocol settings, see the Network Guide.
• For the values of the network settings, consult your network administrator or internet service provider (ISP).

Specifying Network Settings

1 Press [Menu] ➝
or
to select <1.LAN SETTINGS> ➝ press [Set].
2 Press
or
to select <1.IP ADDRESS AUTO.> ➝ press [Set].
3 Press
or
● To obtain an IP address automatically (dynamic allocation):
to select <ON> ➝ press [Set].
4 Press
or
to select <1.DHCP>, <2.BOOTP>, or <3.RARP> ➝ press [Set].
5 Press
or
6 Press [Stop/Reset] to return to the standby display.
7 Restart the machine by disconnecting the power cord, and then reconnecting it.
● To specify an IP address manually (static allocation):
to select <OFF> ➝ press [Set].
4 Press
or
to select <2.IP ADDRESS> ➝ press [Set].
5 Press
or
6 Enter an IP address of the machine using the numeric keys ➝ press [Set].
Write down the IP address you entered: _______ . _______ . _______ . _______
to select <3.SUBNET MASK> ➝ press [Set].
7 Press
or
8 Enter the subnet mask using the numeric keys ➝ press [Set].
Write down the subnet mask you entered: _______ . _______ . _______ . _______
to select <4.DEFAULT GATEWAY> ➝ press [Set].
9 Press
or
10 Enter the default gateway address using the numeric keys ➝ press [Set].
Write down the gateway address you entered: _______ . _______ . _______ . _______
11 Press [Stop/Reset] to return to the standby display.
12 Restart the machine by disconnecting the power cord, and then reconnecting it.
to select <6.NETWORK SETTINGS> on the LCD ➝ press [Set].
MENU
6. NETWORK SETTINGS
NETWORK SETTINGS
1. LAN SETTINGS
LAN SETTINGS
1. IP ADDRESS AUTO.
IP ADDRESS AUTO.
ON
IP ADDRESS AUTO.
1.DHCP
IP ADDRESS AUTO.
OFF
LAN SETTINGS
2. IP ADDRESS
IP ADDRESS
000.000.000.000
_
LAN SETTINGS
3. SUBNET MASK
SUBNET MASK
000.000.000.000
_
LAN SETTINGS
4. DEFAULT GATEWAY
DEFAULT GATEWAY
000.000.000.000
_