Canon Color imageCLASS MF8180c Quick Start Manual - Page 11
Browse online or download pdf Quick Start Manual for All in One Printer Canon Color imageCLASS MF8180c. Canon Color imageCLASS MF8180c 25 pages. Color laser copier - printer - scanner - fax - network capabilities
Also for Canon Color imageCLASS MF8180c: Remote Ui Manual (40 pages), Network Manual (49 pages), Starter Manual (35 pages)
Print Page
DRPD:
To distinguish between fax and voice calls by
using Distinctive Ring Pattern Detection.
NOTE
The DRPD mode requires subscription to a DRPD
●
service. For more information, contact your local
telephone company.
Manual:
When an extension telephone is connected to the
machine, you can receive faxes by pressing [B&W
Start] before hanging up the extension telephone.
4 Press
or
(arrow keys) to select
<2.USER SETTINGS> ➝ press [Set].
5 Press
or
(arrow keys) to select <1.TEL
LINE SETTINGS> ➝ press [Set].
6 Press
or
(arrow keys) to select <1.UNIT
TEL NUMBER> ➝ press [Set].
7 Enter your fax number using the numeric keys
➝ press [Set].
Congratulations! You have now completed the machine setup.
Where to go from here...
Once you have completed all steps in this document, see the next chapter "Printing, PC Faxing,
Scanning, and Networking" to set up the machine for use in a network and to install driver software.
• For basic operations of all functions of your machine, see the Basic Guide.
• For details on sending and receiving faxes, see the Facsimile Guide.
• For information on the driver software, see the Software Guide (included in the User Software CD).
• For details on the network function of the machine, see the Network Guide (included in the User
Software CD).
• For information on remotely monitoring and controlling machine functions through a network, see
the Remote UI Guide (included in the User Software CD).
NOTE
•
Remember to register your machine to ensure product support.The serial number is located on the back of the machine.
8 Press
or
LINE TYPE> ➝ press [Set].
9 Press
or
<TOUCH TONE> or <ROTARY PULSE> ➝
press [Set].
10Press [Menu] to go back one level ➝
(arrow keys) to select <2.UNIT NAME> ➝
press [Set].
11Enter the unit name using the numeric keys
max. 24 characters, including spaces➝ press
[Set].
NOTE
For details on how to input characters, see P 2-1,
●
"Guidelines for Entering Numbers, Letters, and
Symbols," in the Facsimile Guide.
12Press [Stop/Reset] to return to the standby
display.
- 11 -
(arrow keys) to select <2.TEL
(arrow keys) to select
or