American Standard Cadenza Whirlpool 6060.028WC Features & Dimensions - Page 2
Browse online or download pdf Features & Dimensions for Hot Tub American Standard Cadenza Whirlpool 6060.028WC. American Standard Cadenza Whirlpool 6060.028WC 2 pages. Whirlpool
Print Page
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUP-
PORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 2-WALL TILING BEAD KIT No.751755-100 MUST BE ORDERED SEPARATELY.
▲
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
●
FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
975mm
(38-3/8)
OUTLINE OF
CUTOUT
1661mm
(65-3/8)
178mm x 381mm
(7 x 15) CUTOUT
346mm
(13-5/8)
143mm
254mm
C/L OF
(5-5/8)
(10)
DRAIN
C/L OF OVERFLOW
89mm
(3-1/2)
83mm
(3-1/4)
38mm
(1-1/2)
1-1/2 N.P.T. THREAD
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 6060 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP
1949mm
(76-3/4 REF.)
C/L
SEAT AREA
PUMP
114mm
(4-1/2)
E-Z-Install™ HEATER
INTEGRAL FEET
SUPPORT
ROUGH FLOOR
76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
822 Lbs. (370 Kg.)
45 x 40 In. (1143 x 1016mm)
49 x 43 In. (1245 x 1092mm)
15-3/8 In. (391mm)
24 Lbs./Sq.Ft. (114 Kgs./Sq.m)
2.1 HP, 15.6 AMPS,120V.
H40
CADENZA™
WHIRLPOOL
ON/OFF SWITCH
RECOMMENDED FITTING
LOCATION 64 X 381mm (2-1/2 X 15)
LEVELING STRINGER
NOT FOR SUPPORT
495mm
(19-1/2)
51mm
(2)
546mm
(21-1/2)
105 Lbs. (48 Kg.)
86 Gal. (326 L)
71 Gal. (269 L)
41.7
68.4
HIGH GLOSS
Revised 2/08