Donaldson Torit RWB-3000 Installation And Operation Manual - Page 7

Browse online or download pdf Installation And Operation Manual for Industrial Equipment Donaldson Torit RWB-3000. Donaldson Torit RWB-3000 12 pages. Remote weld bench

Print Page

Collar Pack

The RWB-2000 has three collar pack sizes; 8, 10,

and 12-inch ID. The RWB-3000 has two collar

pack sizes; 10 and 12-inch ID. Make sure to use

the proper duct system inlet to connect to the col-

lar pack.

Backdraft Panel

The Remote Weld Bench backdraft panel is remov-

able by turning the lift and turn latches and pulling

the panel forward. Use the handles to remove the

panel. This feature allows the customer to clean

the dirty section of the unit. The dirty air section

should be initially cleaned after every 8-12 hours

of operation. When welding on oily parts, cleaning

may be required daily to remove any oily buildup

to minimize risk of fire.

eye bolt

Remote Weld Bench, Models RWB-2000 and RWB-3000

Swing Door

Each Remote Weld Bench has a right and left, lift-

off swing door. This feature accommodates long

and awkward workpieces. When working on small

pieces, the swing doors should be closed to capture

all contaminates.

Optional Industrial Light Fixture (See Figure 3)

When the optional light fixture is ordered, the light

switch and cord are factory installed. Fluorescent

bulb must be supplied by customer.

Work Surface Grounding

The welding work surface is grounded by eye bolts

(two for RWB-2000 and four for RWB-3000) that

are screwed into the welding work surface. Please

refer to your welding supply operation manual.

Figure 3, Light Fixtures and Eye Bolt

optional industrial

light fixture

swing door