American Standard ELLISSE BUILT-IN 2705.XXXW Series Installation Instructions
Browse online or download pdf Installation Instructions for Hot Tub American Standard ELLISSE BUILT-IN 2705.XXXW Series. American Standard ELLISSE BUILT-IN 2705.XXXW Series 4 pages. Whirlpool
Print Page
ELLISSE BUILT-IN™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
SEE FITTING
SPECS FOR
19mm
DIMENSION
(3/4)
387mm
(15-1/4)
813mm
(32)
C/L OF
SUPPLIES
51mm
(2)
C/L OF DRAIN
OUTLET
C/L OF
SHOWER ARM
SAFE-T-HEATER
REMOVABLE BLANK
102mm
(4)
305mm
(12) OPT.
TOP
OF
51mm
DECK
(2)
95mm
C/L OF
(3-3/4)
OVERFLOW
546mm
(21-1/2)
INTEGRAL
FEET
ROUGH
FLOOR
1-1/2 N.P.T.
THREADS
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2703/5 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
SYSTEM II PUMP
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752352-100 REV. H
2703.XXXW
2705.XXXW
SERIES WHIRLPOOL
INSTALLATION INSTRUCTIONS
1524mm
(60)
229mm
WATER RETENTION
(9)
FLANGE (3) SIDES
FINISHED
WALL LINE
229x305mm
(9x12) FLOOR
CUTOUT
ON/OFF SWITCH
ALT. PUMP
PROVIDE ACCESS
LOCATION
TO PUMP FOR SERVICING
ON ALL INSTALLATIONS
FINISHED WALL
C/L OF
VALVES
C/L OF
WATER
SPOUT
RETENTION
FLANGE
LEVELING
STRINGER
NOT FOR
SUPPORT
ROUGH
533mm
FLOOR
(21)
83mm
38mm
(3-1/4)
(1-1/2)
60 x 32 x 21-1/2 In. (1524 x 813 x 546mm)
141 Lbs. (63 Kg.)
643 Lbs. (292 Kg.)
44-1/2 X 20 In. (1130 mm X 508 mm)
58 X 26-1/4 In. (1473 mm X 667 mm)
14-1/2 In. (368 mm)
48 Lbs./Sq.Ft. (231 Kgs./Sq.m)
1.6 HP, 9.7 AMPS, 120V.
2.1 HP, 15.6 AMPS, 120V.
THANK YOU...
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
installation are your selected fittings and electrical
connections for a whirlpool.
To insure maximum performance and pleasure from
PUMP
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Apron Kit*
• Safe-T-Heater 9075.120*
* see your American Standard Distributor
List of Required Components (not included):
• Drain 1583.470*
* see your American Standard Distributor
List of Required Tools and Supplies:
1651-1981mm
(65-78)
Tools
OPTIONAL
• Level
38mm
• Tape Measure
(1-1/2)
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
UNDERSIDE
OF DECK
• Standard
• Personal Safety
• Caulking Gun
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any
shipping damage. If such damage is found, report it to
your vendor immediately.
After inspection and during installation, protect the bath
from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit
and check for leaks.
If a whirlpool, do not make modifications to the whirlpool
system or remove pump from factory mounting. This
60 Gal. (277 L)
could adversely affect the safety and performance of the
50 Gal. (189 L)
whirlpool and void the warranty. Do not handle or move
the whirlpool by the pump, motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided
with the bath and must be ordered separately. Framing
20.8
and enclosing materials are provided by others. Check
35.3
for availability of optional American Standard wall tiling
bead (required for recess installations).
Protect all finished surfaces of the whirlpool during
construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping har-
ness at any time.
• Bath Filler*
Woodworking Tools
Equipment
© American Standard Inc. 2003
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
Stringers
• Drop Cloth
• 15 or 20 amp GFCI
Outlet
• Cement, Plaster,
Grout