American Standard Lifetime 7236L Installation And Operation Manual - Page 14

Browse online or download pdf Installation And Operation Manual for Hot Tub American Standard Lifetime 7236L. American Standard Lifetime 7236L 17 pages. 6' x 36" whirlpools by american standard high gloss acrylic
Also for American Standard Lifetime 7236L: Installation Manual (15 pages), Specification Sheet (2 pages)

Print Page

OPERATION:

NOTE: Each whirlpool is shipped from the factory with an air actuator on/off switch and pump with attached

power supply cord. OPERATING THE SYSTEM WITHOUT WATER (DRY RUNNING) WILL CAUSE PUMP

DAMAGE AND VOID THE WARRANTY. Always fill the whirlpool before operating the pump. The air switch is

mounted either on the deck or side wall of the tub.

Fill the Whirlpool: Water level must be at least one inch (25mm) above the highest jet for proper operation.

(See diagram below.)

Do not fill whirlpool more than 2/3 full prior to the user completely immersing themselves into unit.

Start Whirlpool: Push on center of button. Button will depress and whirlpool will start.

Stop Whirlpool: Depress and release button and whirlpool will stop.

REMOVABLE BLANK

Air Volume Control Adjustments: Water turbulence is determined by the amount of air mixed with the

water. Rotate the air volume control counterclockwise for more turbulence--clockwise for less.

753737-100 Rev. E

SAFE-T-HEATER

AIR TUBING

WATER LEVEL

6060L/V includes factory installed heater

Air Volume Control Adjustments:

MORE AIR

AIR ACTUATOR SWITCH

(location varies with model)

LESS AIR

OUTLET MUST BE

GFCI PROTECTED

(all heaters require separate GFCI)