eKids 672 Manual - Page 2

Browse online or download pdf Manual for Karaoke System eKids 672. eKids 672 2 pages. Cd+g karaoke

Print Page

Using the Microphone

Connect the included microphone to either of the two input jacks

(11) on the unit. Turn on the unit and choose Bluetooth, AUX, or

CDG modes using the Mode Selector (19).

1. Slide the switch on the Microphone to ON. Now you can sing

along to your favorite music in either CD, Bluetooth, or AUX

modes, and hear your voice through the speaker!

2. When not in use, slide the Microphone switch to OFF. Unlock

the removable slots on the side of the unit to store your

microphone, as shown in the image on the right.

CDG Mode

This unit plays CD, CDR, and CDG formats. To play a CD or

CDR, turn on the unit and set the Mode Selector (19) to CDG.

• Open the disc compartment on the front of the unit and insert

the disc face up. Close the compartment door.

• Use the controls to play/pause (6), stop (20).or navigate tracks

(3-4). For CD/CDR formats, press & hold (3-4) to fast-rewind or

fast-forward within current playing track.

To play a CDG disc on your television:

• Connect the included RCA cable (white and red connectors)

to the RCA audio output jacks located at rear of the unit (23).

• Connect the other end of the audio cable to the RCA audio

input jack of a TV set.

• Connect the RCA video cable (yellow connector) to the RCA

video output jack located at rear of the unit (23).

• Connect the other end of the video cable to the RCA video

input jack of a TV set, and make sure your television is set to

the corresponding input.

• Turn on the unit and set the Mode Selector (19) to CDG.

• Insert a CDG disc into the unit and press the Play/Pause

Button (6). Now you can follow the lyrics on the screen and

sing along through the microphone!

• Use the Previous Track (3) and Next Track (4) buttons to

navigate tracks on the CDG.

Repeat/Program Button

To repeat a track on your CD, press the Program/Repeat Button

(5) on the unit. The "Repeat" LED Indicator will blink. Press

again to cancel the play mode.

You can also program up to 20 tracks of the CD in a desired

order. With CD playback stopped, press the Program/Repeat

button once.The "PROG" LED indicator blinks, and the LED

display shows the program number.

Press the Previous Track (3) and Next Track (4) Buttons to

select a track number. When the desired track number is

displayed, press the Program/Repeat Button to confirm entry.

Repeat these steps until all desired tracks are entered. To begin

programmed playback, press the Play/Pause Button (6). To

cancel programmed playback, press the STOP button twice.

1. Voice Control Button

7. Microphone

2. Bluetooth Pairing Button

8. Power On/Off

3. Previous Track/End Call

9. Microphone On/Off

4. Next Track/Answer Call

10. AVC Rotary Dial

5. Program/Repeat Button

11. Microphone Input (x2)

6. Play/Pause

12.

AUX Input

END

Vocal Effects

Use the AVC Rotary Dial (10) or the Echo Rotary Dial

(14) to add vocal effects while you sing! Make sure your

microphone is connected to the unit and the microphone

switch is turned ON.

AVC Rotary Dial:

Spin the dial as you sing to create the ideal sound mix!

Echo Rotary Dial:

Spin the dial as you sing to add an echo effect to your

voice!

13.

Color LEDs

19. Mode Selector Dial

14.

Echo Rotary Dial

20. Stop Button

LED Screen + Indicators

15.

21. Speakerphone/Voice

Control Microphone

16.

Speaker

22. DC Power Input

17.

Master Volume

23. A/V Output

18. Microphone Volume

24. CD Compartment

TALK

Back of Unit

AUX Mode

This unit has an AUX-IN jack, through this jack other audio

sources (MP3 players, etc) can be connected to this unit and

be amplified.

1. Turn on the unit and set the Mode Selector Dial to AUX.

"AU" will glow solid on the LED screen.

2. Connect one end of the included audio cable into the

AUX-IN jack and the other end to the headphone jack of

your audio device.

3. Press PLAY on your audio device to start playback.

Control/navigate tracks from your audio device, too.

Pairing Your Device Via Bluetooth

Make sure your Bluetooth device is fully charged. Turn on your

Bluetooth device and turn on Bluetooth mode (check in

Options or Settings).

• Turn on the unit and set the Mode Selector Dial (19) to BT

mode. Press and hold the Bluetooth Pairing Button (2) for 3

seconds. A tone will sound and the LED screen will flash 'bt'

as the speaker enters pairing mode.

• "Karaoke 672_mdy"" should appear on your device's screen.

If "Not Connected" or similar message appears, select

"Karaoke 672_mdy" to connect. If your device asks for a

passcode, enter '1234'.

• Once paired, a confirmation tone will sound and 'bt" will glow

solid on the LED screen. Put your Bluetooth device in Play

mode to stream audio to the speaker. Use your Bluetooth

device OR the Play/Pause, Previous Track, and Next Track

buttons on the unit to control audio functions.

• Use your favorite karaoke apps while in BT mode, too!

Voice Control Button

When the unit is in BT mode, you can access Siri or Google

Assistant using Voice Control.

• Press and hold the Voice Control Button (1) for 3 seconds to

activate Siri or Google Assistant via your paired smartphone.

When you hear a confirmation tone, speak Voice Control

Microphone (21) to make your voice commands.

Melody App

The Voice Control Button can also be used to activate Melody,

which lets you use voice commands to play any music from

iHeartRadio* or Spotify* To use this feature:

• Download the Melody app on your smartphone using the

App Store or Google Play.

• Open the app and sign into your iHeartRadio and/or Spotify

account within the Melody app.

• With the unit in BT mode, tap the Voice Control Button (1) to

activate the Melody app via your paired smartphone.

• Once you hear a confirmation tone, speak into the Voice

Control Microphone (21) to make your voice commands.

• If music is playing, tap the Voice Control Button once to

Pause. To make a new voice command, press the Voice

Control Button once, wait one second, then press it again.

*iHeartRadio not available in Canada

*Spotify Premium account required

Speakerphone

The unit is equipped with a speakerphone function that allows

you to answer and end phone calls when connected via

Bluetooth. This function can be used while in BT mode.

1. When your smartphone receives an incoming call, you will

hear it ring through the speaker. Press the Next Track/

Answer Call Button (4) to accept the call, and speak into the

Speakerphone/ Voice Control Microphone (21).

2. To end the call, press the Previous Track/ End Call

Button (3).