DAB ACTIVE JC 62 Instruction For Installation And Maintenance - Page 7
Browse online or download pdf Instruction For Installation And Maintenance for Water Pump DAB ACTIVE JC 62. DAB ACTIVE JC 62 20 pages.
Print Page
4.2 Control panel functions
There is the possibility of remote signalling of the alarm signal; in fact, on the electronic card, Active
has two male faston outlets ( 4.7 mm ) to allow the connection.
(see fig. 14 on page 27)
Contact characteristics: 24V - 5A – normally open (N.O.)
4.3 Regulating the Start pressure.
To regulate the Start pressure, unscrew the protective cap and turn the green trimmer knob. The pressure may
be set at a minimum of 1.5 bar or a maximum of 2.5 bar. (Fig.2)
START PRESSURE REGULATION
FROM 1.5 TO 2.5 bar
ENGLISH
GREEN WARNING LIGHT ON
− System live or correct operation.
GREEN WARNING LIGHT ON
RED WARNING LIGHT BLINKING
− No water: the pump will perform a series of
− Overheating of the motor.
− Blockage of the pump / motor.
GREEN WARNING LIGHT ON
RED WARNING LIGHT ON
− Protection against excess temperature of hydraulic
Fig. 2
21
automatic restarts.
parts .