Canon imageCLASS D1120 User Manual - Page 19
Browse online or download pdf User Manual for All in One Printer Canon imageCLASS D1120. Canon imageCLASS D1120 36 pages. Canon imageclass d1120: user guide
Print Page
Connect the Machine to Network
To use the machine by connecting to the network, you must set up the IP address.
An IP (Internet Protocol) address is an identification number assigned to each individual computer connected to
the Internet.
To use the following functions, you must set up the IP address in advance.
Remote UI:
Access and change the machine settings from a web browser on the computer by using the Remote UI software.
•
Scan to File Server :
Send a scanned document to a file server from the computer.
•
E-Mail:
Send the scanned documents attached to an e-mail message through a network.
•
PC print:
Print the documents from the computer.
•
PC fax:
Fax the document on the computer.
•
I-Fax (Receive):
Receive documents from the machine that is compatible with I-fax.
•
The following flow chart indicates the settings needed for each function.
Specify the IP Address Settings
Automatic Setting
By default, the IP address is assigned to the machine automatically by the DHCP server. Therefore, all you need to
do when using DHCP is just to connect the network cable. After connecting the LAN cable, wait until the machine
gets the IP address.
Check IP Address Setting
To make sure this machine is communicating to the network properly, perform the procedure on p. 18.
–
It is recommended that the network administrator performs the procedure on p. 18.
–
Before performing the procedure on p. 18, make sure that the machine is turned ON and connected to a network.
4 Set Up Network Connection
17