EKKO EB12E Series User Manual - Page 9

Browse online or download pdf User Manual for Lifting Systems EKKO EB12E Series. EKKO EB12E Series 18 pages. Full electric straddle stacker
Also for EKKO EB12E Series: Manual (17 pages), Manual (18 pages)

Print Page

- 8 -

Transport:

A. In the process of transportation vehicles must be firmly fixed in truck or truck.

B. Reduce the fork to the lowest position and vehicle safety park. Use stainless steel tie

transverse lashing car leg through the tray at the bottom middle gap,

C. With the lifting of the special lock locking fixed in each of the two car is fixed on the tray.

3.3 outage

A. When stored, move the goods, vehicles will be dropped to the lowest position, all

lubrication points will be mentioned in this manual grease(check), to prevent vehicle

corrosion and dust.

B. Take out the battery and check the safety equipment after storage vehicles without

extrusion.

C. The final vehicle outages, give the vehicle to the designated recycling companies.

D. According to regulations, oil, batteries and electrical components must be recycled.

4.Daily inspection

This chapter describes the operation of the vehicle should be carried out before the

examination before work.

Daily inspection can effectively find faults in this car or failure. The following points should

be checked before operating the vehicle.

The cargo will be removed from the body, reduce the fork.

If you find any fault, please stop using this car.

Check whether there are scratches, deformation or cracks.

Check the cylinder leaks.

Check the condition of the vehicle longitudinal driving.

Check the chain and the roller is damaged or corrosion.

Check whether the wheel can move smoothly.

Press the emergency stop button to check the emergency braking function.

Brake function check handle lever switch.

Press the button to check for lifting and lowering function.

Check whether there is damage and protective net is installed correctly.

Check the buzzer.

Bolts and nuts are tightened inspection of all.

Check the key switch function.

Check the speed limit switch.

Visually check whether there is any damage pipes or wires.

If the vehicle is equipped with a gear rack, check whether there is damage, whether the

correct installation.

- 8 -