EKO KSB900BIS Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Speaker System EKO KSB900BIS. EKO KSB900BIS 16 pages. 2.2ch soundbar with built-in subwoofer

Print Page

GENERAL OPERATION

POWER ON & OFF

1. Plug in the power cord with one side of AC IN on soundbar and the other side to an AC

wall outlet. When you connect the soundbar to the main socket, the unit will be in

STANDBY mode, firstly its light will on in red.

2. Switch on the sound bar by short-pressing

control, then it will enter into bluetooth mode automatically.

3. Press and hold the

switch it off, and then disconnect the main plug from the main socket if you want to switch

the unit off completely.

SELECT MODES

Press the

input button on the top of the soundbar or press the MODE button on the remote

control to select the BT, AUX, OPTICAL, HDMI Arc in, USB mode. The selected mode will show

by the different light indication and the voice prompts.

PLAYING AUDIO VIA BT CONNECTION

Turn on the sound bar and then the soundbar will enter into bluetooth mode automatically, or

if it's on other mode, short-press the

Bluetooth mode and the blue LED light on the sound bar will flicker in the Bluetooth pairing

mode.

Activate the pairing function on your phone or other compatible device & select "KSB900BIS"

by BT connection.

1. When successfully paired, you will hear a voice prompt "bluetooth connected" and the LED

turn to solid blue light. Then music on your phone or other compatible device that you

selected can be played on the sound bar.

2. You can use the volume buttons on the sound bar or on the remote control to adjust the

volume to your requirements

3. If you wish, you can change the audio settings by using the relevant buttons on the

remote control.

Notes:

• If your pairing device gets switched off or gets manually disconnected, the sound bar will

automatically enter pairing mode.

• A successful connection will be re-established with the already paired device(s) once you

re-enter wireless range (10m). To connect to other devices, repeat the above pairing steps.

• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode

even if no device is paired, so switch off if not in use.

This soundbar has a last-function-used memory; it will resume using the last mode before it was

turned OFF after it is turned ON again.

button on sound bar or on the remote control for 2 seconds to

button on sound bar or remote control to switch it to

button on top of the soundbar or on remote