Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Kitchen Appliances Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B. Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088B 9 pages. Multi-functional kitchen machine
Print Page2. Insert the worm shaft into the cutter housing.
3. Fit the cutter blade on the shaft with the cutting edge upward.
3. Place the medium grinding disc, fine grinding disc or coarse grinding disc
(depending on your need) onto the worm shaft.
4. Install the screw tightly.
5. Put the assembled cutter housing into the outlet of the multifunction head by
turning it anti-clockwise in the vertical position (a click should be heard).
6. Place the tray on the upright part of the cutter housing.
7. Now the appliance is ready for mincing.
Dismantle appliance
1. Press the unlock lever 9 and swing up the drive arm.
2. To remove an attachment, press lightly in again and unlock by turning
anticlockwise slightly.
3. Remove the attachment.
4. To remove the splash guard 6, pull it downwards. When doing so, first pull
the splash guard 6 down at the back slightly.
5. Unlock the mixing bowl 7 by rotating slightly in a clockwise direction.
6. Remove the mixing bowl 7.
7. Press the unlock lever 9 and swing the drive arm down into the working
position.
Removing the blender jug 2:
1. Turn the blender jug 2 anti-clockwise until that the little nib points to the
open padlock symbol.
2. Remove the blender jug 2.
3. Put the removeable cover 2 3 back on.
Removing the mincing Tube 5:
Reverse operation in step "Fitting mincing Tube 5" above.
Operation Guide
knead dough:
1. The dough hook or mixing blade should be used.
2. Suggestion flour and water at a ratio of 5 ：3.
3. When filling the m
, please ensure that the maximum quantity is not
ixing bowl
exceeded.
4. Maximum quantity of flour is 1500g.
5. "DM" mode should be sued.
6. Use No longer than 4 minutes continuously at a time.
7. Let the appliance cool down to room temperature after each process.
Mixing shakes, cocktails or other liquids:
1. The mixing beater should be used.
2. Mix the ingredients according to the available recipe, from speed 1 to 6 for
about 4minutes.
3. Do not exceed the maximum quantity for the mixing bowl.
4. Use No longer than 4 minutes continuously at a time.
5. Let the appliance cool down to room temperature after each process.
Whipping egg whites or cream:
1. The egg whisk should be used.
2. Used " EW" setting mode.
3. Maximum quantity 16 eggs.
4. For whipped cream, whip 250ml fresh cream at "EW" setting mode.
5. When filling the mixing bowl with fresh milk, cream or other ingredients, please