Astin Trew AT2-2100 Your Personal User Manual - Page 8
Browse online or download pdf Your Personal User Manual for Amplifier Astin Trew AT2-2100. Astin Trew AT2-2100 12 pages.
Print Page
6. Product Specifications
Make and Model
General Description
Mains voltage input
Inputs, line level
Input impedance
Outputs
Output power
Damping factor
Frequency response
Distortion (1W)
Distortion (80W)
Hum + noise
Power source
Power source
Dimension
Colour options
Weight (unboxed)
Boxed dimensions
Gross weight (boxed)
7. Troubleshooting
Your Astin Trew AT2-2100 should give you many years of trouble free musical
pleasure. However, if it does not seem to be working properly, please ensure you
have tried these 'simple' tests before you contact your Dealer for further advice. 99%
of problems tend to be simple to rectify.
Check the power chord is connected and the power switch is illuminated when you
switch on.
1. Check all input and output signal cables are fully inserted at both ends.
2. Ensure the input selection is switched to your desired input.
3. Ensure your ancillary equipment is working correctly.
8
Astin Trew AT2-2100
Two channel integrated amplifier
230VAC (50 ~ 60Hz) / Voltage range: 220--240VAC
5 x RCA, 1 x XLR
47K ohm
Speakers x 1, pre-amplifier x 1, sub-bass x 1, headphone jack x 1
90W (8 ohm) / 135W (4 ohm)
60 (8 ohm)
+0.1 / - 3dB @ <10Hz - >140KHz (10W/8ohms output)
0.002% @ 1W/8ohms 20Hz...20KHz
volume control @ 20dB overall gain
<0.01% @ 80W/8ohms 20Hz...20KHz
volume control @20dB overall gain
>104dB below full output, volume control
@20dB overall gain
220V – 240V 50Hz / 60Hz
standby – 50W
(W x D x Ht. o/a) 430mm x 102mm x 410mm
Silver and Black (special colours to order)
11.6Kg
(W x D x Ht.) 550mm x 500mm x 200mm
13Kg (inc. accessory items)
AT2-2100 V1.0/17.01.2018